Prof. A. Lüder

Head of Institute

Prof. Dr.-Ing. habil. Arndt Lüder

Institute of Ergonomics, Manufacturing Systems and Automation (IAF)
Chair of Production Systems and Automation
Gebäude 10, Universitätsplatz 2, 39106 Magdeburg, Germany, G10-444
Sprechzeiten: currently corona-dependent no office hours: please contact via email
Vita

Prof. Dr.-Ing. habil. Arndt Lüder attended the Otto-von-Guericke University at Magdeburg, Germany, and completed his diploma degree in mathematics in 1995 and in mathematics-economics in 1997. From 1995 to 2000 he worked as research engineer at the chair of automation technology at Otto-von-Guericke-University Magdeburg and Martin-Luther-University Halle-Wittenberg were he finished it PhD in 2000. Since 2001 he is working at the IAF. Here he is leading the teaching area factory automation since January 2006 and has finalized its habilitation degree as affiliated professor for distributed control systems in 2007. Since 2017 he is managing head of institute at IAF.

Research

The main focus of his work is on the application of innovative technologies in the area of factory automation such as object-oriented and agent-based architecture and implementation concepts, mechatronical concepts, Engineering methodologies and processes based on them, as well as Ethernet-based communication protocols.  Beside that, he is involved in GMA technical committee "Agents in Automation" and the AutomationML alliance.

Projects

Current projects

Digitale Anlagenmodellierung mit neutralen Datenformaten (DIAMOND) Teilvorhaben: Konsistente, prozessorientierte Datenmodelle im Engineering von Produktionssystemen (KPDM)
Duration: 01.11.2022 bis 31.10.2025

Bei der Einführung neuer Produkte müssen bestehende Produktionssysteme erweitert oder verändert werden. Von neuen Produkten leiten sich neue Fertigungsprozesse ab, welche entweder manuell oder durch Anlagentechnik umgesetzt werden. Diese Anlagentechnik (Ressourcen) steht also in direkter Verbindung mit Änderungen an Produkt und Prozess. Der Anlagenlebenszyklus enthält eine Vielzahl von einzelnen datenverarbeitenden Prozessen in verschiedenen Ingenieursdisziplinen, viele davon Entwurfsprozesse. Jede dieser Disziplinen arbeitet bereits mit digitalen Modellen. Die einzelnen Schritte bauen aufeinander auf und jede Disziplin konsumiert Informationen aus dem vorhergehenden Prozess. Die Übernahme dieser Informationen findet aktuell meist manuell statt, was zu einem sehr hohen zeitlichen Aufwand, sowie zu einem erhöhten Fehleraufkommen führt. Dies gilt auch für das gesamte Ecosystem, in dem z. B. Komponentenhersteller die relevanten Informationen des eigenen Engineerings extrahieren und diese der gesamten Wertschöpfungskette wieder zur Verfügung stellen. Die aktuelle Transformationsgeschwindigkeit in der Automobilindustrie lässt aber lange Projektlaufzeiten sowie negative Qualitätseinflüsse nicht mehr zu. Deshalb ist es notwendig Änderungen zeitnah allen Beteiligten am Prozess zur Verfügung zu stellen und ein gemeinsames "Bild” über einen effizienten Austausch der Informationen zu ermöglichen. Hauptzielstellung der OvGU im Rahmen des DIAMOND-KPDM Projektes ist die Entwicklung und Anwendungsdemonstration eines Vorgehens zur anwendungsfallspezifischen Erstellung und Nutzung eines Systems von aufeinander abgestimmten domänenspezifischen und domänenübergreifenden Datenmodellen, dem sogenannten Common Data Modell, das einen effizienten und effektiven Entwurf von Produktionssystemen durch eine effiziente und effektive Transformation, Integration und Selektion von Entwurfsdaten ermöglicht.

View project in the research portal

PMV-based analytics for knowledge-driven manufacturing (PMV4Analytics)
Duration: 28.06.2021 bis 30.06.2025

Im Entwurf von Produktionssystemen entstehen eine Vielzahl von Informationen, die für die optimale Nutzung der Produktionssysteme relevant sind, jedoch heute aus Gründen der notwendigen Informationsaufbereitung und -weitergabe keine Verwendung finden. Diesem Problem soll sich das Projekt annehmen. Auf Basis einer engineeringprozessübergreifenden Informationsmodellierung und einer passenden Gestaltung von Anlagenkomponenten entsteht eine Methode zur gemeinsamen Gewinnung, Aufbereitung und Analyse von Engineering- und Laufzeitdaten und deren beispielhafte Anwendung in mehreren Anwendungsfällen.

Fördergeber

  • FFG Österreich über das Austrian Center for Digital Production (CDP)

Kooperationen
  • Technische Universität Wien
  • Volkswagen

View project in the research portal

Workflow-Automatisierung in der Auftragsbearbeitung im technischen Vertrieb
Duration: 01.07.2023 bis 31.03.2024

Ziel des Projektes ist die Identifikation von Möglichkeiten zur systematischen Automatisierung der Auftragsbearbeitung in einem mittelständischen Stahlbaubetrieb im Bereich des Sondermaschinenbaus. Dabei soll auf Basis der Produkt-Prozess-Ressource-Modellierungsmethode sowie unter Anwendung des international standardisierten Speicherformats AutomationML untersucht werden, wie die automatisierte schrittweise Erstellung sowie Ausführung von Vertriebsdokumenten und Fertigungsplänen auf Basis einer Detailkonstruktion erfolgen kann. Dabei sollen zum einen alle für ein mittelständisches Unternehmen wichtigen Faktoren hinsichtlich ökonomischer, qualitativer, personalseitiger und technologischer Faktoren berücksichtigt und zum anderen eine einfache Anwendbarkeit durch das Führungspersonal ermöglicht werden.

Zur Validierung der identifizierten Automatisierungsmöglichkeiten soll ein Softwareprototyp entstehen, mit dem das Partnerunternehmen die entwickelten Vorgehensweisen und Datenmodelle hinsichtlich ihrer praktischen Anwendbarkeit überprüfen kann.

View project in the research portal

Completed projects

AutomationML (4) - Entwicklung eines umfassend nutzbaren Austauschformates
Duration: 01.01.2020 bis 31.12.2023

Das Projekt AutomationML wurde am 1.1.2006 gestartet. Im Rahmen des Entwurfs- und Implementierungsprozesses von Produktionssystemen werden in den verschiedenen Prozessphasen verschiedenste Entwurfswerkzeuge verwendet, die jeweils spezifischen Zwecken dienen. Dies beginnt mit dem Entwurf der zu fertigenden Produkte mittels CAD Werkzeugen, geht über den Entwurf des Fertigungsprozesses z.B. mittels Materialflusssimulationswerkzeugen bis zur Implementierung von Steuerungscode für SPS oder Robotersteuerungen mit entsprechenden herstellerspezifischen Werkzeugen. Durch die Werkzeugfülle und die Fülle der von ihnen unterstützten unterschiedlichen Schnittstellen kommt es jedoch an den Übergängen zwischen den einzelnen Phasen des Entwurfs- und Implementierungsprozesses zu Systembrüchen und Informationsverlusten, die einen bedeutenden Einfluss auf die Laufzeit und die Kosten des Entwurfs- und Implementierungsprozesses besitzen. Um dieses Problem zu minimieren, hat sich das AutomationML Projekt die Entwicklung eines umfassend nutzbaren Austauschformates für alle im Entwurfs- und Implementierungsprozess relevante Daten und dessen internationale Standardisierung zum Ziel gesetzt. Dieses Austauschformat soll die Interoperabilität verschiedenster Werkzeuge entlang des Entwurfs- und Implementierungsprozesses gewährleisten. Schwerpunkte der Arbeiten des IAF im AutomationML-Projekt sind die Untersuchung und Entwicklung der Teile des Austauschformates, die im Rahmen des Entwurfs von Steuerungssystemen notwendig sind.

Kooperationen:

  • AutomationML e.V.

View project in the research portal

EtherNet/IP Konformitäts-Test-Labor (4)
Duration: 01.01.2020 bis 31.12.2023

Das Projekt EtherNet/IP Konformitäts-Test-Labor wurde 1.1.2008 gestartet. EtherNet/IP ist eines der meist genutzten Ethernet basierten Industrieprotokolle. Es wurde von der Open Device Vendor Association (ODVA) entwickelt und wird von dieser gepflegt. Auf Grund der rasch wachsenden Nachfrage nach EtherNet/IP Produkten hat die ODVA das Center Verteilte Systeme (CVS) am IAF der Otto-von-Guericke-Universität Magdeburg beauftragt, das erste europäische Konformitäts-Test-Labor für EtherNet/IP-Produkte zu errichten und zu betreiben. Im Rahmen dieses Konformitäts-Test-Labors werden - ausschließlichen im Auftrag der ODVA - Geräte für den industriellen Einsatz auf ihre Konformität zum EtherNet/IP Protokoll getestet. Auf der Basis der gesammelten Erfahrung bei der Anwendung Ethernet basierter Technologie entwickelt das CVS weit reichende Wissensbestände zur Unterstützung industrieller Anwender bei der Umsetzung von industriellen Kommunikationssystemen.

Kooperationen

  • ODVA, Inc.

View project in the research portal

Verhaltensanalyse biegeschlaffer Bauteile für Griff-in-die-Kiste Anlagen
Duration: 01.06.2023 bis 31.12.2023

Ziel des Projektes ist die Erforschung des Verhaltens biegeschlaffer Teile beim roboterbasierten Griff-in-die-Kiste (rGiK). RGiK Applikationen für steife Bauteile, insbesondere Metallteile, sind in der Forschung realisiert und befinden sich in der Automobilindustrie in der beginnenden Anwendung. Sie basieren auf der sicheren Erkennung der Lageposition der zu handhabenden Werkstücke, die dann ein exaktes Greifen ermöglicht. Dabei spielt die feste Form des zu handhabenden Bauteils eine bedeutende Rolle, die ein Patternmatching zur Positionserkennung ermöglicht.

Biegeschlaffe Bauteile besitzen diese Stabilitätseigenschaften nicht. Ihre Positionserkennung kann nicht durch ein einfaches Patternmatching erfolgen. Im Rahmen des Forschungsprojektes wird evaluiert, wie die Erkennungs- und Handling-Systeme gesteuert werden müssen, um einen rGiK für biegeschlaffe Teile zu ermöglichen und an welchen Stellen aktuelle hardware- und softwaretechnische Grenzen gesetzt sind, die weitere Forschungsarbeiten motivieren können.

View project in the research portal

Automatisierbarkeit einer manuellen Montage auf Basis von low-cost Systemen
Duration: 01.01.2022 bis 31.03.2023

In vielen Bereichen der industriellen Produktion finden auch heute noch Montagevorgänge manuell statt. Hier ist insbesondere geringqualifiziertes Personal tätig, dessen Vergütung nur unwesentlich über dem Mindestlohn liegt. Infolge der Zunahme des Onlinehandels, der allgemeinen Entwicklung der Alterspyramide und der allgemein steigenden Qualifizierung von Personal nimmt die Anzahl der für manuelle Montage verfügbaren Arbeitskräfte ab.

Ziel des Projektes ist es, an praktischen Beispielen Strategien für klein- und mittelständische Unternehmen zum Umgang mit diesem Personalproblem zu entwickeln. Dabei liegt der Fokus auf Methoden zur Analyse der Automatisierbarkeit von manuellen Montageschritten auf Basis von low-cost Systemen, die einen zeitnahen ROI aus den gesparten Personalkosten ermöglichen.

Kooperationspartner: BETOMAX® systems GmbH & Co. KG

View project in the research portal

SBA-K1 COMET Zentrum interacting Cristian Doppler Lab Lecurity and Quality Improvement in the Production System Lifecycle (CDL-SQI)
Duration: 01.04.2018 bis 31.03.2023

Entwurfsprozesse für Produktionssysteme sind durch Ingenieursleistungen charakterisiert, an denen unterschiedlichste Ingenieursdisziplinen mit für diese spezialisierten Entwurfswerkzeugen beteiligt sind und in deren Rahmen unterschiedlichste Entwurfsergebnisse zwischen diesen Entwurfswerkzeugen konsistent ausgetauscht werden müssen. Bisher sind für diesen Informationsaustausch unterschiedliche Technologien entstanden, die verschiedene Anforderungen des Datenaustausches zum Beispiel hinsichtlich Informationsstrukturierung, Informationssicherheit und Informationskonsistenz erfüllen können.

Ziel des Projektes ist es, einige dieser Technologien in einem gemeinsamen Szenario zusammen zu führen und anwendenden Unternehmen zu ermöglichen, ihre Entwurfsprozesse schrittweise an die Nutzung dieser Technologiemenge anzupassen. Besondere Bedeutung wird dabei das international standardisierte Datenaustauschformt AutomationML (nach IEC 62714) besitzen.

Fördergeber

  • Österreichischer Bund

Kooperationen
  • Technische Universität Wien
  • SMS Group
  • STIWA Group

View project in the research portal

Simulatives Analysesystem für Griff-in-die-Kiste Anlagen
Duration: 01.11.2022 bis 31.12.2022

Ziel des Projektes ist es eine Konzeption und eine prototypische Umsetzung eines simulativen Analysesystems für die Bewertung der Erreichbarkeit einer Zielpunktmenge für "Griff in die Kiste"-Applikationen im Karosseriebau der Automobilfertigung. Dabei soll die Frage: Kann ein Roboter eine Liste von Punkten kollisionsfrei erreichen? beantwortet werden.

View project in the research portal

INTEGRATE - Offene Dienste-Plattform für durchgängiges Engineering und 3DTechnologien
Duration: 01.02.2017 bis 31.01.2020

Ein grundlegender Anspruch von Industrie 4.0 ist die Integration zukunftsweisender digitaler Technologien in industriellen Anwendungen mit dem Ziel, Effizienz und Qualität der entsprechenden Anwendungen signifikant zu verbessern. Dabei wird die Nutzung von heute bzw. in naher Zukunft verfügbaren Technologien in flexiblen Wertschöpfungsnetzen fokussiert. Für Effizienzsteigerungen ist es notwendig, sowohl die verschiedenen, im Lebenszyklus von Produktionssystemen involvierten Parteien - über Produkt- und Produktionssystemplaner bis zum Anlagenfahrer - datentechnisch zu vernetzen als auch die realen Produkte und Produktionsressourcen durch ein digitales Abbild zu überlagern. Damit werden Szenarien wie ein Treffen von frühzeitigen Aussagen über die Machbarkeit, Herstellungskosten und Fertigungskapazitäten für Produkte oder die autonome Adaptation von Produktionsressourcen möglich.

Das Ziel ist die Entwicklung einer Plattform, die es einem Verbund von Entwurfswerkzeugen, die nicht über ein gemeinsames Datenbanksystem synchronisiert sind, ermöglicht, über Planungsobjekte miteinander zu kommunizieren. Es soll eine entsprechende Plattform auf der Grundlage des Datenaustauschformates AutomationML entwickelt werden, die kooperatives, unternehmensübergreifendes Engineering ermöglicht. Auf dieser Plattform sollen Dienste, die den objektorientierten Datenaustausch unterstützen, sowohl für den Austausch von Planungsdaten als auch für Einbindung und Auswertung von Laufzeitdaten bereitgestellt werden.

Projektpartner

  • INPRO Innovationsgesellschaft für fortgeschrittene Produktionssysteme in der Fahrzeugindustrie mbH (Konsortialführung)
  • FZI Forschungszentrum Informatik am Karlsruher Institut für Technologie
  • Otto-von-Guericke-Universität Magdeburg
  • ABB Asea Brown Boveri Ltd
  • logi.cals automation solutions & services GmbH

View project in the research portal

AutomationML (3)
Duration: 01.01.2014 bis 31.12.2019

During the design and implementation process of manufacturing systems several design and implementation tools are applied covering the various needs of the different phases of the design and implementation process. Starting with the product design based on CAD tools over the engineering of manufacturing processes using tools like material flow simulation tools up to implementation of control code for PCL, or robot control systems several tools are involved.
The huge amount of applicable tools and the much higher amount of different supported export and import interfaces of these tools results in breakages and data loos among the different phases of the design and engineering process causing waist of time and money within the design and engineering process.
The aim of the AutomationML project is the design and international standardisation of a data exchange format covering all information relevant within the design and implementation process of manufacturing systems useable within all phases of the design and engineering process. This data format should increase the interoperability of the applied tools.
Focal point of the work of IAF is the consideration and development of the parts of the AutomationML exchange formal required for the design of control applications.
www.automationml.org

View project in the research portal

EtherNet/IP Conformance Test Lab
Duration: 01.01.2018 bis 31.12.2019

EtherNet/IP is one of the most used Ethernet based industrial communication protocols. It has been developed and will be maintained by Open Device Vendor Association (ODVA). Following the fast increasing request for EtherNet/IP based products, ODVA has authorised the Centre Distributed Systems (CVS) at IAF of Otto-von-Guericke University Magdeburg, Germany, to establish the first European conformance test lab for EtherNet/IP products. Within this conformance test lab CVS will execute conformance tests for devices intended to be used within industrial applications exploiting EtherNet/IP based communication to prove the protocol conformance of them. These tests will be executed only by order of ODVA. On the basis of experiences gained in the application of Ethernet-based technology the CVS develops extensive knowledge resources to support industrial users in the implementation of industrial communication systems. www.iaf-bg.ovgu.de/odva_tsp

View project in the research portal

Entwicklung und Integration interdependenter Agentensysteme zur dezentralen Produktionsplanung und -steuerung
Duration: 18.01.2016 bis 21.12.2018

Die Dissertation geht der  Frage nach, wie agentenbasierte verteilte Steuerungssysteme die anwachsende Komplexität der Steuerung produzierender Systeme und ihre steigende Modularisierung und Vernetzung adäquat abbilden können. Dabei soll eine Methode gesucht werden, mit deren Hilfe schrittweise modulare Steuerungssysteme für modulare Produktionssysteme auf Agentenbasis entworfen, implementiert und integriert werden können.

View project in the research portal

Analyse und Evaluierung im Umfeld des angewandten mechatronischen Engineerings von Industrieanlagen (AMENIA) - Advanced Manufacturing Process Chain(AMProC)
Duration: 01.01.2015 bis 30.09.2018

In der immer komplexer werdenden Produktion immer komplexer werdender Produkte bilden die Identifikation von Abhängigkeiten zwischen Produktionsprozessen und Produkteigenschaften (bzw. Produktdesign) und deren Verwendung zur Steuerung der Produktionsprozesse eine wachsende Herausforderung. 
Ziel der Forschung ist es,  Vorgehensweisen und Anwendungswissen bereitzustellen, mit deren Hilfe zum einen eine integrierte Betrachtung von Produkt und Produktionsprozess im Entwurf von Produktionssystemen ermöglicht und zum anderen der Entwurf von anpassbaren Steuerungsstrukturen für Produktionssysteme möglich wird. Damit sollen eine Verkürzung der Time-to-Market der Produkte sowie eine verbesserte Effizienz der Produktion und eine erhöhte Qualität der Produkte erreicht werden.
Kooperationsparnter:
Siemens AG

View project in the research portal

A novel migration approach towards decentralized automation in cyber-physical production systems
Duration: 01.01.2015 bis 30.09.2018

Die Promotion untersuchte die Frage, wie eine Migrationsstrategie aussehen muss, mit deren Hilfe ein bestehendes Steuerungssystem schrittweise in ein Industrie 4.0 orientiertes Steuerungssystem überführt werden kann. Es wurde ein auf dem Systems Engineering basierendes Vorgehen entwickelt, das in jedem Entwicklungsschritt das betreffende Produktionssystem analysiert und, mit Blick auf eine langfristige Entwicklungsstrategie, optimiert, ohne dabei den kurzfristigen Nutzen derartige Systemveränderungen unberücksichtigt zu lassen.

View project in the research portal

Methoden der projektübergreifenden Wiederverwendung im Anlagenbau
Duration: 01.03.2016 bis 28.02.2018

Die Dissertation beschäftigt sich mit dem Problem der Wiederverwendung von Engineering Informationen im Rahmen des Anlagenentwurfs von Fertigungssystemen, insbesondere im Bereich der Konzeptionierung und Realisierung in der Automobilindustrie. Das Thema zielt dabei auf eine neuartige Methode der Identifikation, Nutzung und Dokumentation wiederverwendbarer Einheiten im Rahmen des Karosseriebauentwurfs der Automobilindustrie. Es wurde eine Methodik zur Wiederverwendung zur Entwurfszwecken im Rahmen des Lebenszyklus desselben Produktionssystems als auch eine Methodik zur Lebenszyklus übergreifenden Wiederverwendung entwickelt, deren Anwendbarkeit an mehreren Bespielen nachgewiesen wurde.

View project in the research portal

EtherNet/IP Conformance Test Lab
Duration: 01.01.2013 bis 31.12.2017

EtherNet/IP is one of the most used Ethernet based industrial communication protocols. It has been developed and will be maintained by Open Device Vendor Association (ODVA). Following the fast increasing request for EtherNet/IP based products, ODVA has authorised the Centre Distributed Systems (CVS) at IAF of Otto-von-Guericke University Magdeburg, Germany, to establish the first European conformance test lab for EtherNet/IP products. Within this conformance test lab CVS will execute conformance tests for devices intended to be used within industrial applications exploiting EtherNet/IP based communication to prove the protocol conformance of them. These tests will be executed only by order of ODVA. On the basis of experiences gained in the application of Ethernet-based technology the CVS develops extensive knowledge resources to support industrial users in the implementation of industrial communication systems. www.iaf-bg.ovgu.de/odva_tsp

View project in the research portal

Agent-based mechanism for smart distributed dependability and security and control of Cyber-Physical Production Systems
Duration: 01.01.2016 bis 22.12.2017

Die Promotion beschäftigt sich mit der Anwendung von Multiagentensystemen zur Umsetzung von Industrie 4.0 Stukturen und der damit möglichen Erhöhung der Flexibilität von Produktionssystemen. Im Ergebnis entstand eine generische Architektur, mit deren Hilfe bestehende Steuerungssysteme in Richtung Industrie 4.0 mit geringem Aufwand weiterentwickelt werden können.

View project in the research portal

Methoden und Werkzeugen zur Planung und Umsetzung der internationalen Verteilung von Engineeringaufwendungen für den Entwurf und die Realisierung technischer Systeme
Duration: 01.09.2015 bis 30.09.2017

Die Dissertation beschäftigt sich mit Methoden und Werkzeugen zur Planung und Umsetzung der internationalen Verteilung von Engineeringaufwendungen für den Entwurf und die Realisierung technischer Systeme und validiert diese Methoden an Beispielen vorrangig aus dem Bereich des Engineerings von großtechnischen Anlagen der Energieerzeugung und -verteilung. Im Ergebnis der Promotion entstehen damit Einstiegspunkte in die kontrollierte Umsetzung und Überwachung von Internationalisierungsvorhaben im Engineering technischer Systeme.

View project in the research portal

Recovery Planning Method for Production SystemsVon März 2012 bis September 2017
Duration: 01.03.2012 bis 30.09.2017

Die Promotion betrachtet das Ende des Lebenszyklus von Produktionssystemen insbesondere den Anlagenrückbau. Dabei wird die Forschungsfrage untersucht, wie ein Rückbauplanungsprozess auf Basis einer durchgängigen Modellierung von Produktionssystemen und ihren Komponenten aussehen kann und welche Informationen mit Bezug zu einer Industrie 4.0 Komponente im Verlauf des Lebens eines Produktionssystems gesammelt werden sollten, um einen optimalen Rückbau und eine optimale Rückgewinnung dieser Komponenten zu ermöglichen. Im Ergebnis entstand eine auf AutomationML aufbauende Methodik, die die notwendigen Planungsdaten verfügbar macht und für eine optimierte Rückbauplanung anwendet.

View project in the research portal

AutomationML 4.0
Duration: 01.01.2016 bis 30.06.2017

Hauptziele des Verbundvorhabens "AutomationML - Teil 4 als Sprache der Steuerungstechnik für Industrie 4.0" sind die Unterstützung der nationalen und internationalen Normung des steuerungstechnisch relevanten Teiles des AutomationML-Datenformates sowie die Verbreitung der Ergebnisse der Normung zum Zweck der maximalen Nutzung der inhärenten Potenziale. Dazu werden im industriellen Umfeld Anforderungen an den Datenaustausch aufgenommen und gemeinsam mit unterschiedlichen Nutzerorganisationen in Lösungen übertragen.

finanziert durch das Bundesministerium für Wirtschaft und Energie, (Förderprogramm: Transfer von Forschungs- und Entwicklungsergebnissen (FuE) durch Normung und Standardisierung)

View project in the research portal

Data Exchange for Physics-based Simulation of Material Handling Systems in Digital Factory
Duration: 01.01.2015 bis 28.02.2017

Die Promotion beschäftigt sich mit der Nutzung von AutomationML im Umfeld der Simulation von Logistiksystemen. Es wurde eine Methodik entwickelt, um mit Hilfe von AutomationML Informationen, die zur Beschreibung des physikalischen Verhaltens von Logistiksystemen notwendig sind, zu transportieren. Zum anderen wurde Prototypen für Werkzeugschnittstellen implementiert, die dieses Datenformat aufgreifen und den Informationstransport in Werkzeugketten realisieren.

View project in the research portal

Agents and SCT based self* control architecture for production systems
Duration: 01.01.2014 bis 30.11.2016

Die Promotion beschäftigt sich mit der Anwendung von Multiagentensystemen zur Umsetzung von Industrie 4.0 Stukturen und der damit möglichen Erhöhung der Flexibilität von Produktionssystemen. Im Ergebnis entstand eine generische Architektur, mit deren Hilfe bestehende Steuerungssysteme in Richtung Industrie 4.0 mit geringem Aufwand weiterentwickelt werden können.

View project in the research portal

Generic, protocol-independent configuration tool for industrial communication networks (GecKo)
Duration: 01.01.2015 bis 30.06.2016

The scope of the research project Gecko is allocated within the problem range of communication within industrial facilities. The aim of the project is the creation of a novel methodology and necessary tools to support or enable protocol- and architecture crossing design, configuration and documentation of arbitrary industrial communications networks. Especially SMEs will be enabled to meet high individualization of kind and characteristics of technologies within the use cases of their customers. Therefore, methodologies and data models for the engineering of industrial communication structures are analyzed, a methodology is developed for integration and consistent use of these data, suitable specifically built tool components are integrated within one tool, and their applicability is evaluated.

GecKo-FA: This partial project focusses on the application field of factory automation and strives to lessen the duration of installation and commisiioning of the communications systems by 20%, therefor to limit the error rate and improve its documentation. (DEHOF)
GecKo-CB: The partial project GecKo-CB focusses on the development and execution of commuications system models within neutral format, which are qualified for Gecko project parts and beyond that for the universal use within arbitrary applications. (OvGU)
GecKo-PV: The partial project GecKo-PV focusses on the application field of photovoltaics. It strives to shorten the design of PV-systems heavily by standardized processes and library based layout. (iPLON)

View project in the research portal

Verbesserung der Systematischen Wiederverwendung im Engineering automatisierter Anlagen und Systeme - Konzept und Unterlagen für Beratungsprojekte nach VDI 3695
Duration: 01.02.2013 bis 31.03.2014

In der industriellen Praxis treffen derzeit unterschiedliche technologische, ökonomische, rechtliche und soziale Strömungen aufeinander, die zu einem veränderten Umgang von entwerfenden und nutzenden Ingenieuren mit Produktionssystemen geführt haben bzw. derzeit führen.

Ein technologisch und ökonomisch motivierter Trend sind wachsende Anforderungen an die Flexibilität und Adaptierbarkeit von Produktionssystemen, die es nutzenden Ingenieuren ermöglichen, eine größere Produktpalette in veränderlichen Ausbringungsmengen zu produzieren. Dieser Trend wirkt auf die ökonomische Bedeutung einzelner Phasen des Lebenszyklus von Produktionssystemen und dessen ökonomische Gesamtsamtbilanz ein.
Die Verbesserung von Entwurfsprozessen ist ein wichtiger, sich daraus motivierender Trend, der insbesondere auf die Verringerung der Erstellungskosten von Produktionssystemen zielt. Darauf reagierend haben unterschiedlichste Forschungs-, Entwicklungs- und Standardisierungsanstrengungen des Versuch unternommen, Methoden für eine effiziente Gestaltung des Entwurfsprozesses von Produktionssystemen bzw. zu Bewertung der Effizienz des aktuellen Standes dieser Prozesse zu entwickeln.
Ein besonders prominentes Ergebnis dieser Anstrengungen ist die VDI Richtlinienreihe 3695 - Engineering von Anlagen - Evaluieren und Optimieren des Engineerings. Im Rahmen dieser Richtlinie werden mögliche Zielzustände für Entwurfsorganisationen (Unternehmen, Unternehmensteile oder kooperierende Unternehmen, die einen gemeinsamen Entwurfsprozess ausführen) definiert und Kriterien für deren Erreichung beschrieben. Auf Basis dieser Richtlinie sowie weiterer am Institut für Arbeitswissenschaft, Fabrikautomatisierung und Fabrikbetrieb (IAF) entwickelter Analysemethoden wie der 4D Analysemethode ist es möglich, Potentiale, die einzelne Unternehmen für die effektivere Gestaltung ihrer Arbeit im Rahmen von Entwurfsprozessen besitzen, zu identifizieren und auf dieser Basis Handlungsempfehlungen zu generieren.
Ziel dieses Projektes ist es in Kooperation mit der österreichischen logi.cals GmbH und dem Christian Doppler Labor Software Engineering Integration für flexible Automatisierungssysteme der TU Wien  Konzepte und Unterlagen für entsprechende Beratungsprojekte nach VDI 3695 zur Verbesserung der systematischen Wiederverwendung im Engineering automatisierter Anlagen und Systeme insbesondere vor dem Hintergrund der Entwicklung von Steuerungsapplikationen zu entwickeln bzw. zu erstellen. Aufgabe der Beratungsprojekte soll es dabei sein, einen auf Basis einer Zustandsanalyse eines betrachteten Unternehmens und der in ihm ausgeführten Entwurfsprozesse konkrete Maßnahmen zu identifizieren, die eine effektivere Gestaltung von Entwurfsprozessen von ermöglichen.

View project in the research portal

AutomationML (2)
Duration: 01.04.2009 bis 31.12.2013

During the design and implementation process of manufacturing systems several design and implementation tools are applied covering the various needs of the different phases of the design and implementation process. Starting with the product design based on CAD tools over the engineering of manufacturing processes using tools like material flow simulation tools up to implementation of control code for PCL, or robot control systems several tools are involved.

The huge amount of applicable tools and the much higher amount of different supported export and import interfaces of these tools results in breakages and data loos among the different phases of the design and engineering process causing waist of time and money within the design and engineering process.

The aim of the AutomationML project is the design and international standardisation of a data exchange format covering all information relevant within the design and implementation process of manufacturing systems useable within all phases of the design and engineering process. This data format should increase the interoperability of the applied tools.

Focal point of the work of IAF is the consideration and development of the parts of the AutomationML exchange formal required for the design of control applications.
www.automationml.org

View project in the research portal

Analysis and Evaluation in Fields of Applied Mechatronic Engineering for Industrial Plants (AMENIA) / Model based Methods for Control (MOMA)
Duration: 07.10.2010 bis 30.09.2013

A special challenge within the engineering of production systems is the methodological consistency of the engineering along the complete life cycle of the production system and the use of models and tools within. The consistent use of model based methods and mechatronic ideas provides main advantages to optimise the engineering of technical system in addition to strategic and process oriented measures. In cooperation with industrial partners, practical concepts and methods of model based engineering for control solutions are developed and evaluated in the field of model based engineering of industrial systems.

View project in the research portal

Erstellung einer Studie über Entwicklungspotenziale für Steuerungsprogrammierwerkzeuge
Duration: 01.02.2013 bis 30.09.2013

Der Fokus des Projektes liegt dabei auf der effizienten Gestaltung von Entwurfsprozessen von Produktionssystemen und der in ihnen enthaltenen Steuerungssysteme sowie dessen Einfluss auf Entwurfswerkzeuge.
Dabei sollen eine Untersuchung der Anforderungen an moderne Entwurfswerkzeuge für die Entwicklung von Steuerungsapplikationen im Rahmen des Entwurfsprozesses von Produktionssystemen, die Vorbereitung, Ausführung und Auswertung einer Online-Umfrage zum Themengebiet sowie die Entwicklung von Empfehlungen zur Entwicklungsprozessverbesserung im Bereich Programmiersysteme erfolgen.

View project in the research portal

Development and prototypical implementation of a tool for virtual commissioning in all phases of the engineering process by combination of visualization systems and behavior modeling - model integration (EVIE-model)
Duration: 01.03.2012 bis 31.08.2013

The project operates in the area of engineering processes and engineering tools for production systems and especially in the area of virtual commissioning in the context of the digital factory. It aims at creating a novel tool for the virtual commissioning of production systems in various phases of the engineering process. For this purpose the project plans to develop an information model for the integration of visualization and behavioral description information, a visualization method, a behavioral simulation methodology and a use methodology and implement a prototype based on existing tools. The resulting tool enables particularly small and medium sized companies to apply their specific tools more efficiently in the engineering process of production systems and to claim their specific ability of improving the market position in comparison to other tools. In the field of virtual commissioning project results enable the project partner to achieve technological leadership.

View project in the research portal

EtherNet/IP Konformitäts-Test-Labor (1)
Duration: 01.01.2008 bis 31.12.2012

EtherNet/IP ist eines der meist genutzten Ethernet basierten Industrieprotokolle. Es wurde von der Open Device Vendor Association (ODVA) entwickelt und wird von dieser gepflegt. Auf Grund der rasch wachsenden Nachfrage nach EtherNet/IP Produkten hat die ODVA das Center Verteilte Systeme (CVS) am IAF der Otto-von-Guericke-Universität Magdeburg beauftragt, das erste europäische Konformitäts-Test-Labor für EtherNet/IP-Produkte zu errichten und zu betreiben. Im Rahmen dieses Konformitäts-Test-Labors werden - ausschließlichen im Auftrag der ODVA - Geräte für den industriellen Einsatz auf ihre Konformität zum EtherNet/IP Protokoll getestet. Auf der Basis der gesammelten Erfahrung bei der Anwendung Ethernet basierter Technologie entwickelt das CVS weit reichende Wissensbestände zur Unterstützung industrieller Anwender bei der Umsetzung von industriellen Kommunikationssystemen.  
www.iaf-bg.ovgu.de/odva_tsp

View project in the research portal

MONA Development of a mobile network analysis device for industrial communication systems
Duration: 01.11.2010 bis 30.04.2012

Aims of the MONA project are the development of an advanced diagnosis and supervision technology for industrial Ethernet-based communication systems and the generation of a knowledge based distributed analysis method for these systems. Based on both, an analysis of the communication system and the control system it is integrated within will be possible. Main results of the project are a tool and a method for communication system analysis within commissioning, use and maintenance of industrial production systems.

View project in the research portal

MEDA Mechatronic oriented data exchange within production system engineering
Duration: 01.08.2010 bis 31.10.2011

The engineering process of industrial production systems is characterised by a required reduction of engineer?s duration and an increased flexibility of the production system itself. To deal with these challenges a mechatronical idea based and tool supported engineering process for production systems is developed currently. Within this process mechatronical units are the main entities of interest. Main foundation of such a mechatronical engineering process is a, with respect to data exchange consistent tool chain, enabling a lossless exchange of engineering results. Aim of this project is the development of a data exchange format based on existing standards. This format has to be able to store all relevant information on mechatronical units. Exploiting this format an interface engine will be developed enabling tools to read data from and write data to the data exchange format. Within the project a prototypical implementation of the interface engine will be used to connect the tools taraVRbuilder and taraVRcontrol.

View project in the research portal

Security und Administration in Industrial Ethernet e.V. (SecIE)
Duration: 01.01.2008 bis 31.12.2009

Security und Administration in Industrial Ethernet e.V. (SecIE) is anindustrial association aiming at enforcing the standardisation in theareas of IT-Security and Administration of communication systems withinfactory automation. Therefore SecIE develops technical guidelinesregarding basic for end users and system integrators, the customisationof office IT solutions for the industrial application, securityconcepts and architectures, and Interfaces. Additionally, SecIEprovides knowledge about risks, differences among security concepts,and technological possibilities.
In the course of the work for SecIECVS will develop guidelines and knowledge within the fields ofinteroperability of devices within security architectures and datasecurity relevant use cases of industrial communication. In additionCVS will assist SecIE within its administrative activities.
www.secie.org

View project in the research portal

AutomationML (1)
Duration: 01.10.2006 bis 31.12.2008

During the design and implementation process of manufacturing systems several design and implementation tools are applied covering the various needs of the different phases of the design and implementation process. Starting with the product design based on CAD tools over the engineering of manufacturing processes using tools like material flow simulation tools up to implementation of control code for PCL, or robot control systems several tools are involved.

The huge amount of applicable tools and the much higher amount of different supported export and import interfaces of these tools results in breakages and data loos among the different phases of the design and engineering process causing waist of time and money within the design and engineering process.

The aim of the AutomationML project is the design and international standardisation of a data exchange format covering all information relevant within the design and implementation process of manufacturing systems useable within all phases of the design and engineering process. This data format should increase the interoperability of the applied tools.

Focal point of the work of IAF is the consideration and development of the parts of the AutomationML exchange formal required for the design of control applications.
www.automationml.org

View project in the research portal

PABADIS PROMISEPABADIS based Product Oriented Manufacturing Systems for Re-Configurable Enterprises
Duration: 01.08.2005 bis 31.07.2008

Future manufacturing will require high flexibility/adaptability and speed with respect to organisation of production and supply-chain management and require an increasing amount of services and inter-company collaboration. These future requirements especially concern control and networking of embedded control systems of manufacturing enterprises at ERP (office), MES (factory control) and production level. Taking these requirements into account and building on top of the successful FP5 Project PABADIS, the PABADIS"PROMISE (P2) project extends the idea of distributed control to an innovative architecture which incorporates both resource and product. With the project"s new paradigm "The Order is the Application" which stipulates a correspondingly innovative control and networking architecture across all three levels, P2 will combine European and international forces. As designated outcome the P2 project will develop a new control architecture based on distributed intelligence, a new manufacturing ontology, a first embedded Real-Time agent platform for control, a new generation of RFID"s, a new generation of field control devices, and building blocks for a new generation of Enterprise Resource Planning systems. At ERP level new functions together with new interfaces will be developed, enabling direct access from ERP level to the field control system following the new P2 ontology, which provides a framework for product and production process description and comparison. Both Manufacturing Execution System (MES) level and Field Control level will be completely decentralised. Innovative to current practice and research, the MES level will be decentralised into Mobile Software Agents which are located (stored) in smart Tags which are attached directly to the product (Agent on RFID). Once the product arrives at a processing station, the Agent is read out of the RFID Tag and invoked to ensure product processing, further planning based on the ontology based descriptions, and further necessary transport steps. For this, a first Embedded Real-Time Agent Platform will be developed. To be flexible with regard to the logical usage of the plant s machinery, the product dependent control part (for which a new manufacturing ontology will be developed) has to be provided individually for each product in the moment of production and is also located within the Mobile Software Agent, respectively in the RFID Tag. The Field Control level, correspondingly, is reduced to Residential Software Agents, which represent the physically possible production process. Only these fine grained control building blocks are permanently located on the resource control devices. They will behave as drivers for the physics of the resources similar to drivers for PC periphery systems like printers and modems. Hence, the PABADIS"PROMISE project will provide basic architectures, methodologies and technologies for the long term innovation of manufacturing systems.

View project in the research portal

AgentAut - Agent based interaction architecture for distributed control systems
Duration: 01.07.2005 bis 30.06.2007

The increase of flexibility, the enlargement of maintenance capabilities, and the reduction of design efforts are main trends within industrial manufacturing applications during the last 20 years. Thereby, control systems have played an important role. Several research and development activities have been made to provide means for the design of flexible, easy implementable, and easy maintainable control systems. They have resulted in two main architectures, order control systems and process control systems. Both architectures will use design pattern for distributed control systems, but these design pattern are related to the individual architectures and thereby different and not applicable in the other architecture. Order control systems are mainly agent based and will navigate manufacturing orders at runtime through a system of manufacturing resources. Process control systems are mainly function block oriented and consider distribution and coordination aspects of control decisions to control devices. Hence, order control systems are related to the higher levels of the automation pyramid and process control systems to lower levels of the automation pyramid. These trends have resulted in breakages of the used technologies and structures during the design and implementation especially between the different levels of the automation pyramid. Function blocks and agent systems, the mainly used technologies of both control architecture groups, seam to be not combinable by technical, technological, and architectural reasons. The overcoming of this problem is one of the most important challenges of the current research in the control field today. The aim of the AgentAut project is the development of an integrated methodology for distributed control systems under involvement of order and process control systems. Therefore, AgentAut will combine the main architectural building blocks of both control architecture types of distributed control systems, i.e. agents and function blocks, to a consistent control architecture with a dedicated control system design methodology.

View project in the research portal

JAKOBI - java-based and components-based industrial control
Duration: 01.05.2004 bis 30.07.2006

The JAKOBI project aims at the development of new control devices based on the programming language Java, which enables a platform independent application development, plug-and-play mechanisms, web based management functionalities and supports the usage in distributed control systems. For that purpose a consistent package of hardware, Java Virtual Machine, runtime environment and application building blocks will be developed. Important parts oft that development are the design and specification of a framework of basis building blocks for the application development, mechanisms for a flexible, easy and user-friendly device management as well as the presentation of a migration path between the present technology in industrial control and the new object-oriented control. JAKOBI will make a far-reaching contribution for the flexibility of control systems and simplification of design, re-design and implementation of control systems.

View project in the research portal

Handbook Industrial Ethernet
Duration: 01.07.2005 bis 30.09.2005

Im Rahmen dieses Projektes wird für die IAONA (Industrial Automation Open Networking Alliance) das nunmehr dritte Handbuch zum Thema Industrial Ethernet im IAF erstellt. Das Handbuch, das in englischer Sprache erscheint, ist mittlerweile in über 50 Ländern der Erde verteilt wurden. Das Handbuch gibt dem Anwender einen umfassenden und praxisorientierten Überblick über den Stand der Technik im Bereich Industrial Ethernet. Neben den technischen Grundlagen des Ethernet vermittelt das Dokument unter anderem Wissen der Themenbereiche Verkabelung, Security, Safety, Echtzeit und Wireless. Zudem werden alle 10 in der Normung der IEC befindlichen Ethernet-Protokolle vorgestellt.

View project in the research portal

Wissensbausteine für das VSEK-Portal
Duration: 01.07.2005 bis 30.09.2005

Ziel des Projektes ist die Darstellung des Standes der Technik und der Forschung in den Bereichen "Funktionales Engineering" und "Software-Engineering mit Ethernet in der Automatisierungstechnik", die dann vom Fraunhofer ISIE in Form von sogenannten Wissensbausteinen für die Wissensdatenbank "www.software-kompetenz.de" zur Verfügung gestellt werden. Schwerpunkte der Arbeit sind vor allem die Bereiche: Verteilte Intelligenz in der Automation, modernste Kommunikationstechnologien (Ethernet-Technologie u.a.), modernste Programmiertechnologien, modernste Steuerungshardware sowie neuartige Steuerungsentwurfsmethodiken.

View project in the research portal

MODYMA
Duration: 01.12.2001 bis 31.05.2004

The project MODYMA subject is the modular development of high-dynamic, highly accurate filinf machine tools, which combine the following innovative ideas:- reduction of weight of the moving items provided by the manufacturing of the machine structure in mineral cast- increased dynamics and precision of the machine due to the employment of linear motors as direct drive on all linear axis- essential improvement of human-machine-interlinks by means of an integration of controlling and programming system as well as web based management The first essential component of the project is the development of an agent-based product management from the product erection in CAD over the generation of controlling programmes in NC-programming devices up to the product revision on the CNC-machine. The second relevant component is the development of a system providing the web based management of CNC-machines.In both components, the latest IT-technologies will be integrated in the surroundings of the CNC-controlling technology, and therefore the handling of CNC-machines and the interaction of human and machine simplified.

View project in the research portal

PABADIS - Plant automation based on distributed systems
Duration: 01.12.2001 bis 31.01.2004

The aim of PABADIS is to develop new plant automation structures and concepts which can be used to build flexible production sites. Such automation system consists of decentralised, independent, intelligent, and autonomous objects which represents the processing functions of physical (drilling, milling, assembly, or painting a work piece) and logical (calculating a further schedule or searching for next processing unit) nature and products agents for product description and self-handling.

View project in the research portal

SIF
Duration: 01.10.2000 bis 31.05.2003

The adaptable transport system: Development of modular components for material flux systems delivering seperately packed articles The main focus of this research project is the development of modular components for material flux systems delivering seperately packed articles in view of material flux, information flux and power transmission aimed at attaining the adaptability in transport systems. For achieving the adaptability in production systems, which is almost already attained as regards to the organizational area, an entirely modular-constructed material flux system shall be designed and transposed as a prototype. Such modular-constructed components will render it possible - both regarding the physical material transport using profiles "from the construction kit" and regarding the information flux using distributed systems in the field range as well as through engines with integrated power kit and through a software-, particularly objective finding strategy suited to this strictly modular-constructed concept - to carry out systems that manage to work entirely without switchbox and convert the demand for adaptability on a technical level, too.

View project in the research portal

Publications

2023

Book chapter

Validating production test scenarios with cyber-Physical system design models

Biffl, Stefan; Hoffmann, David; Kiesling, Elmar; Meixner, Kristof; Lüder, Arndt; Winkler, Dietmar

In: 2023 IEEE 25th Conference on Business Informatics (CBI) / IEEE CBI , 2023 - Piscataway, NJ : IEEE, insges. 10 S. [Konferenz: IEEE 25th Conference on Business Informatics, CBI, Prague, Czech Republic, 21-23 June 2023]

Book chapter

Model-driven engineering of flexible production systems with the RAMI toolbox

Binder, Christoph; Calà, Ambra; Hoffmann, David; Vollmar, Jan; Neureiter, Christian; Lüder, Arndt

In: 2023 IEEE 21st International Conference on Industrial Informatics (INDIN) / IEEE International Conference on Industrial Informatics , 2023 - [Piscataway, NJ] : IEEE, insges. 8 S. [Konferenz: IEEE 21st International Conference on Industrial Informatics, INDIN, Lemgo, Deutschland, 18 - 20 July 2023]

Book chapter

Combining models for safety and security concerns in automating digital production

Kropatschek, Sebastian; Hollerer, Siegfried; Hoffmann, David; Winkler, Dietmar; Lüder, Arndt; Sauter, Thilo; Kastner, Wolfgang; Biffl, Stefan

In: 2023 IEEE 21st International Conference on Industrial Informatics (INDIN) / IEEE International Conference on Industrial Informatics , 2023 - [Piscataway, NJ] : IEEE, insges. 8 S. [Konferenz: IEEE 21st International Conference on Industrial Informatics, INDIN, Lemgo, Deutschland, 18 - 20 July 2023]

Book chapter

Towards flexible production systems engineering according to RAMI 4.0 by utilizing PPR notation

Binder, Christoph; Hünecke, Paula; Neureiter, Christian; Lüder, Arndt

In: 2023 IEEE 21st International Conference on Industrial Informatics (INDIN) / IEEE International Conference on Industrial Informatics , 2023 - [Piscataway, NJ] : IEEE, insges. 6 S. [Konferenz: IEEE 21st International Conference on Industrial Informatics, INDIN, Lemgo, Deutschland, 18 - 20 July 2023]

Book chapter

Impact of modified bin picking container

Sarna, Matthias; Lüder, Arndt; Tegtmeier, André; Weist, Jens; Espericueta, Sofia

In: 2023 3rd International Conference on Electrical, Computer, Communications and Mechatronics Engineering (ICECCME) - Piscataway, NJ, USA : IEEE, insges. 7 S.

Book chapter

Approach for identifying data usage information objects for the later implementation in production environments: Enabling a logic for the information modelling based on use cases using a conversation concept

Nowacki, Natalie Samanta; Müller, Ralph Klaus; Grossmann, Daniel; Lüder, Arndt

In: ICIEAEU '23 - New York,NY,United States : Association for Computing Machinery . - 2023, S. 169-175 [Konferenz: 10th International Conference on Industrial Engineering and Applications, Rome, Italy, January 9-11, 2023]

Book chapter

Towards test-driven performance validation of a flexible cyber-physical production system

Biffl, Stefan; Meixner, Kristof; Hoffmann, David; Winkler, Dietmar; Lüder, Arndt

In: 2023 IEEE 28th International Conference on Emerging Technologies and Factory Automation (ETFA) / IEEE International Conference on Emerging Technologies and Factory Automation , 2023 - [Piscataway, NJ] : IEEE, insges. 4 S. [Konferenz: IEEE 28th International Conference on Emerging Technologies and Factory Automation, ETFA, Sinaia, Romania, 12-15 September 2023]

Book chapter

Integrated production quality and security analysis

Hoffmann, David; Lüder, Arndt; Weidlinger, Rene; Biffl, Stefan

In: 2023 IEEE 28th International Conference on Emerging Technologies and Factory Automation (ETFA) / IEEE International Conference on Emerging Technologies and Factory Automation , 2023 - [Piscataway, NJ] : IEEE, insges. 8 S. [Konferenz: IEEE 28th International Conference on Emerging Technologies and Factory Automation, ETFA, Sinaia, Romania, 12-15 September 2023]

Book chapter

Towards case-based reuse of FMEA models for complex production systems

Hoffmann, David; Hünecke, Paula; Lüder, Arndt; Biffl, Stefan

In: 2023 IEEE 28th International Conference on Emerging Technologies and Factory Automation (ETFA) / IEEE International Conference on Emerging Technologies and Factory Automation , 2023 - [Piscataway, NJ] : IEEE, insges. 4 S. [Konferenz: IEEE 28th International Conference on Emerging Technologies and Factory Automation, ETFA, Sinaia, Romania, 12-15 September 2023]

Book chapter

Consistent extension of networks of digital representations of production system assets

Lüder, Arndt; Hoffmann, David; Meixner, Kristof; Hünecke, Paula; Biffl, Stefan

In: 2023 IEEE 28th International Conference on Emerging Technologies and Factory Automation (ETFA) / IEEE International Conference on Emerging Technologies and Factory Automation , 2023 - [Piscataway, NJ] : IEEE, insges. 4 S. [Konferenz: IEEE 28th International Conference on Emerging Technologies and Factory Automation, ETFA, Sinaia, Romania, 12-15 September 2023]

Book chapter

Facilitating FMEA investigation of industrial systems during basic engineering with RAMI 4.0

Hünecke, Paula; Binder, Christoph; Hoffmann, David; Lüder, Arndt; Neureiter, Christian

In: 2023 IEEE 28th International Conference on Emerging Technologies and Factory Automation (ETFA) / IEEE International Conference on Emerging Technologies and Factory Automation , 2023 - [Piscataway, NJ] : IEEE, insges. 7 S. [Konferenz: IEEE 28th International Conference on Emerging Technologies and Factory Automation, ETFA, Sinaia, Romania, 12-15 September 2023]

Book chapter

From model to implementation - engineering of flexible production systems with RAMI 4.0

Binder, Christoph; Calà, Ambra; Vollmar, Jan; Neureiter, Christian; Lüder, Arndt

In: 2023 IEEE 32nd International Symposium on Industrial Electronics (ISIE) / IEEE International Symposium on Industrial Electronics , 2023 - Piscataway, NJ : IEEE, insges. 6 S. [Symposium: IEEE 32nd International Symposium on Industrial Electronics, ISIE, Helsinki, Finland, 19-21 June 2023]

Peer-reviewed journal article

Organizing reuse for production systems engineering with capabilities and skills

Meixner, Kristof; Rinker, Felix; Waltersdorfer, Laura; Lüder, Arndt; Biffl, Stefan

In: Automatisierungstechnik - Berlin : De Gruyter, Bd. 71 (2023), Heft 2, S. 116-127

Peer-reviewed journal article

Interdisciplinary production risk exploration - a grounded approach to integrate data- and knowledge-driven analytics

Hoffmann, David; Nowacki, Natalie; Biffl, Stefan; Kiesling, Elmar; Meixner, Kristof; Lüder, Arndt

In: Procedia CIRP / CIRP - The International Academy for Production Engineering - Amsterdam [u.a.] : Elsevier, Bd. 120 (2023), S. 1016-1021

Peer-reviewed journal article

Lean engineering - identifying waste in engineering chains

Karch, S.; Lüder, Arndt; Listl, C.; Nowacki, Natalie S.; Hassan, K.; Werner, R.; Hohmann, T.; Müller, S.

In: Procedia CIRP / CIRP - The International Academy for Production Engineering - Amsterdam [u.a.] : Elsevier, Bd. 120 (2023), S. 463-468

Peer-reviewed journal article

Traceable multi-view model integration - a transformation pipeline for agile production systems engineering

Rinker, Felix; Waltersdorfer, Laura; Meixner, Kristof; Winkler, Dietmar; Lüder, Arndt; Biffl, Stefan

In: SN Computer Science - Singapore : Springer Singapore, Bd. 4 (2023), Heft 2, Artikel 205, insges. 25 S.

Peer-reviewed journal article

Quo vadis Automation? - Trends für das Engineering von Automatisierungssystemen

Lüder, Arndt; Steininger, Heinrich; Goltz, Dieter

In: Automatisierungstechnik - Berlin : De Gruyter, Bd. 71 (2023), Heft 1, S. 6-15

Dissertation

Entwicklung einer fähigkeitsbasierten Planungsmethode zur Analyse der Wiederverwendbarkeit von Anlagen am Beispiel von Schraubprozessen in der Automobilendmontage

Herzog, Jan; Lüder, Arndt

In: Magdeburg: Universitätsbibliothek, Dissertation Otto-von-Guericke-Universität Magdeburg, Fakultät für Maschinenbau 2023, 1 Online-Ressource (XI, 160, XII-XXIX, 2,87 MB) [Literaturverzeichnis: Seite XIII-XXVI][Literaturverzeichnis: Seite XIII-XXVI]

Dissertation

Sozio-technischer Gestaltungsansatz für die Industrie 4.0-Befähigung von Produktionssystemen

Nowacki, Natalie Samanta; Lüder, Arndt; Diedrich, Christian

In: Magdeburg: Universitätsbibliothek, Dissertation Otto-von-Guericke-Universität Magdeburg, Fakultät für Maschinenbau 2023, 1 Online-Ressource (XX, 137 Seiten, 2,98 MB) [Literaturverzeichnis: Seite 117-128][Literaturverzeichnis: Seite 117-128]

Dissertation

Planungswerkzeuge für industriefähige Griff-in-die-Kiste-Anwendungen

Sarna, Matthias; Lüder, Arndt; Katterfeld, André

In: Magdeburg, Dissertation Otto-von-Guericke-Universität Magdeburg 2023, XVIII, 134 Seiten [Literaturverzeichnis: Seite 125-134][Literaturverzeichnis: Seite 125-134]

2022

Book chapter

Balanced selection in industrial bin picking

Sarna, Matthias; Espericueta, Sofia; Lüder, Arndt

In: Konferenz: IEEE 27th International Conference on Emerging Technologies and Factory Automation, ETFA, Stuttgart, Germany, 06-09 September 2022, 2022 27th IEEE International Conference on Emerging Technologies and Factory Automation (ETFA) - [Piscataway, NJ]: IEEE . - 2022, insges. 4 S.

Book chapter

Quo vadis Automation? - Trends für das Engineering von Automatisierungssystemen

Lüder, Arndt; Steininger, Heinrich; Goltz, Dieter

In: Entwurf komplexer Automatisierungssysteme - Beschreibungsmittel, Methoden, Werkzeuge und Anwendungen/ IFAT Otto-von-Guericke-Universität Magdeburg - Magdeburg: Otto-von-Guericke-Universität Magdeburg; Jumar, Ulrich . - 2022, insges. 8 S.

Book chapter

Towards design patterns for production security

Hoffmann, David; Biffl, Stefan; Meixner, Kristof; Lüder, Arndt

In: Konferenz: IEEE 27th International Conference on Emerging Technologies and Factory Automation, ETFA, Stuttgart, Germany, 06-09 September 2022, 2022 27th IEEE International Conference on Emerging Technologies and Factory Automation (ETFA) - [Piscataway, NJ]: IEEE . - 2022, insges. 4 S.

Book chapter

Digital resource models in engineering and operation - data transformation and process changes

Langosch, Martin; Listl, Carmen; Lüder, Arndt

In: Konferenz: IEEE 27th International Conference on Emerging Technologies and Factory Automation, ETFA, Stuttgart, Germany, 06-09 September 2022, 2022 27th IEEE International Conference on Emerging Technologies and Factory Automation (ETFA) - [Piscataway, NJ]: IEEE . - 2022, insges. 4 S.

Book chapter

Formed workpieces in industrial Bbin picking

Sarna, Matthias; Sure, Vamsi; Lüder, Arndt; Weist, Jens

In: Konferenz: IEEE 27th International Conference on Emerging Technologies and Factory Automation, ETFA, Stuttgart, Germany, 06-09 September 2022, 2022 27th IEEE International Conference on Emerging Technologies and Factory Automation (ETFA) - [Piscataway, NJ]: IEEE . - 2022, insges. 4 S.

Book chapter

Towards coordinating production reconfiguration

Biffl, Stefan; Meixner, Kristof; Hoffmann, David; Musil, Jürgen; Rahmani, Hossein; Lüder, Arndt

In: Konferenz: IEEE 27th International Conference on Emerging Technologies and Factory Automation, ETFA, Stuttgart, Germany, 06-09 September 2022, 2022 27th IEEE International Conference on Emerging Technologies and Factory Automation (ETFA) - [Piscataway, NJ]: IEEE . - 2022, insges. 4 S.

Book chapter

A coordination artifact for multi-disciplinary reuse in production systems engineering

Meixner, Kristof; Musil, Jürgen; Lüder, Arndt; Winkler, Dietmar; Biffl, Stefan

In: Konferenz: IEEE 27th International Conference on Emerging Technologies and Factory Automation, ETFA, Stuttgart, Germany, 06-09 September 2022, 2022 27th IEEE International Conference on Emerging Technologies and Factory Automation (ETFA) - [Piscataway, NJ]: IEEE . - 2022, insges. 8 S.

Book chapter

Designing a digital shadow for efficient, low-delay analysis of production quality risk

Kropatschek, Sebastian; Gert, Oskar; Ayatollahi, Iman; Meixner, Kristof; Kiesling, Elmar; Steinberger, Alexander; Lüder, Arndt; Winkler, Dietmar; Biffl, Stefan

In: Konferenz: IEEE 27th International Conference on Emerging Technologies and Factory Automation, ETFA, Stuttgart, Germany, 06-09 September 2022, 2022 27th IEEE International Conference on Emerging Technologies and Factory Automation (ETFA) - [Piscataway, NJ]: IEEE . - 2022, insges. 8 S.

Book chapter

Towards round-trip engineering to evolve complex production systems by utilizing AutomationML

Binder, Christoph; Calá, Ambra; Vollmar, Jan; Neureiter, Christian; Lüder, Arndt

In: Konferenz: IEEE 27th International Conference on Emerging Technologies and Factory Automation, ETFA, Stuttgart, Germany, 06-09 September 2022, 2022 27th IEEE International Conference on Emerging Technologies and Factory Automation (ETFA) - [Piscataway, NJ]: IEEE . - 2022, insges. 6 S.

Book chapter

A bi-directional interface enabling cross-disciplinary engineering with RAMI 4.0 and AutomationML

Binder, Christoph; Neureiter, Christian; Lüder, Arndt

In: Konferenz: IEEE 27th International Conference on Emerging Technologies and Factory Automation, ETFA, Stuttgart, Germany, 06-09 September 2022, 2022 27th IEEE International Conference on Emerging Technologies and Factory Automation (ETFA) - [Piscataway, NJ]: IEEE . - 2022, insges. 4 S.

Book chapter

Efficient multi-view change management in agile production systems engineering

Rinker, Felix; Kropatschek, Sebastian; Steuer, Thorsten; Meixner, Kristof; Kiesling, Elmar; Lüder, Arndt; Winkler, Dietmar; Biffl, Stefan

In: Konferenz: 24th International Conference on Enterprise Information Systems, ICEIS, Online, April 25-27, 2022, Proceedings of the 24th International Conference on Enterprise Information Systems - Volume 1 - [Setúbal, Portugal]: SCITEPRESS - Science and Technology Publications, Lda.; Filipe, Joaquim . - 2022, S. 134-141

Peer-reviewed journal article

Das AutomationML-Komponentenmodell - Engineering-Informationen konsistent zusammenführen

Hundt, Lorenz; Wiegand, Mathias; Lüder, Arndt; Meyer, Torben

In: atp Magazin - Essen: Vulkan Verlag GmbH, Bd. 63 (2022), 4, S. 78-85

Peer-reviewed journal article

Industriefähiges Bin Picking - Taktzeit und Entkopplungsspeicher in industriellen Griff-in-die-Kiste-Anwendungen

Sarna, Matthias; Weist, Jens; Friedl, Felix; Lüder, Arndt

In: Zeitschrift für wirtschaftlichen Fabrikbetrieb - Berlin: de Gruyter, Bd. 117 (2022), 12, S. 856-861

Peer-reviewed journal article

Engineering data treasures, their collection and use

Lüder, Arndt; Meixner, Kristof; Biffl, Stefan

In: IFAC-PapersOnLine/ Internationale Förderung für Automatische Lenkung - Frankfurt: Elsevier, Bd. 55 (2022), 10, S. 2623-2628

Peer-reviewed journal article

Towards a domain-specific information architecture enabling the investigation and optimization of flexible production systems by utilizing artificial intelligence

Binder, Christoph; Neureiter, Christian; Lüder, Arndt

In: The international journal of advanced manufacturing technology - London: Springer, Bd. 123 (2022), 1-2, S. 49-81

Peer-reviewed journal article

QualSec - an automated quality-driven approach for security risk identification in cyber-physical production systems

Eckhart, Matthias; Ekelhart, Andreas; Biffl, Stefan; Lüder, Arndt; Weippl, Edgar

In: IEEE transactions on industrial informatics - New York, NY: IEEE . - 2022

Dissertation

Systematische Integration von Nichtnutzung in die Produktentwicklung

Augustin, Laura; Lüder, Arndt; Beyer, Christiane

In: Magdeburg: Universitätsbibliothek, Dissertation Otto-von-Guericke-Universität Magdeburg, Fakultät für Maschinenbau 2022, 1 Online-Ressource (XVI, 147 Seiten, 34,48 MB) [Literaturverzeichnis: Seite 121-134]

Dissertation

Agentenbasierte Steuerung virtueller Kraftwerke zur Umsetzung von Demand-Response-Mechanismen deutscher Märkte im industriellen Kontext

Woltmann, Stefan; Lüder, Arndt

In: Magdeburg: Universitätsbibliothek, 2022, 1 Online-Ressource (XVIII, 196 Blätter, 10,24 MB), Illustrationen

Dissertation

Integration der Arbeitsprozessgestaltung in die Entwicklung digitaler Kollaborationssysteme - Gestaltungsmethode und Anwendung für das digitale Engineering

Eisenträger, Marlene; Lüder, Arndt; Diedrich, Christian

In: Düren: Shaker Verlag, 2022, VII, 143 Seiten, Illustrationen, Diagramme, 21 cm x 14.8 cm, 227 g - (Berichte aus der Arbeitswissenschaft)

Non-peer-reviewed journal article

Managing industrial control systems security risks for cyber insurance

Dejung, Simon; Liu, Mingyuan; Lüder, Arndt; Weippl, Edgar R.

In: Dagstuhl Reports/ Schloss Dagstuhl, Leibniz-Zentrum für Informatik - Wadern: Schloss Dagstuhl, Bd. 11 (2022), 10, S. 36-56

2021

Book chapter

Das AutomationML Komponentenmodell

Hundt, L.; Wiegand, M.; Lüder, Arndt; Meyer, T.

In: Kongress: 22. Leitkongress der Mess- und Automatisierungstechnik, Automation 2021 (online), 29.-30. Juni 2021, Automation 2021/ Leitkongress der Mess- und Automatisierungstechnik - Düsseldorf: VDI Verlag . - 2021, S. 433-446 - (VDI-Berichte; Band 2392)

Book chapter

Modelling engineered object dependencies in an AutomationML-based tool chain

Lüder, Arndt; Meixner, Kristof; Behnert, Anna-Kristin; Biffl, Stefan

In: Konferenz: 26th IEEE International Conference on Emerging Technologies and Factory Automation, ETFA, Vasteras, Sweden, 7-10 September 2021, 2021 26th IEEE International Conference on Emerging Technologies and Factory Automation (ETFA)/ IEEE International Conference on Emerging Technologies and Factory Automation - [Piscataway, NJ]: IEEE . - 2021, insges. 4 S.

Book chapter

Towards efficient asset-based configuration management with a PPR asset directory

Biffl, Stefan; Meixner, Kristof; Winkler, Dietmar; Lüder, Arndt

In: Konferenz: 26th IEEE International Conference on Emerging Technologies and Factory Automation, ETFA, Vasteras, Sweden, 7-10 September 2021, 2021 26th IEEE International Conference on Emerging Technologies and Factory Automation (ETFA)/ IEEE International Conference on Emerging Technologies and Factory Automation - [Piscataway, NJ]: IEEE . - 2021, insges. 4 S.

Book chapter

Towards efficient generation of a multi-domain engineering graph with common concepts

Rinker, Felix; Meixner, Kristof; Waltersdorfer, Laura; Winkler, Dietmar; Lüder, Arndt; Biffl, Stefan

In: Konferenz: 26th IEEE International Conference on Emerging Technologies and Factory Automation, ETFA, Vasteras, Sweden, 7-10 September 2021, 2021 26th IEEE International Conference on Emerging Technologies and Factory Automation (ETFA)/ IEEE International Conference on Emerging Technologies and Factory Automation - [Piscataway, NJ]: IEEE . - 2021, insges. 4 S.

Book chapter

Reducing risk in industrial Bin Picking with PPRS configuration and dependency Management

Sarna, Matthias; Meixner, Kristof; Biffl, Stefan; Lüder, Arndt

In: Konferenz: 26th IEEE International Conference on Emerging Technologies and Factory Automation, ETFA, Vasteras, Sweden, 7-10 September 2021, 2021 26th IEEE International Conference on Emerging Technologies and Factory Automation (ETFA)/ IEEE International Conference on Emerging Technologies and Factory Automation - [Piscataway, NJ]: IEEE . - 2021, insges. 4 S.

Book chapter

Big data needs and challenges in Smart Manufacturing - an industry-academia survey

Winkler, Dietmar; Korobeinykov, Alexander; Novák, Petr; Lüder, Arndt; Biffl, Stefan

In: Konferenz: 26th IEEE International Conference on Emerging Technologies and Factory Automation, ETFA, Vasteras, Sweden, 7-10 September 2021, 2021 26th IEEE International Conference on Emerging Technologies and Factory Automation (ETFA)/ IEEE International Conference on Emerging Technologies and Factory Automation - [Piscataway, NJ]: IEEE . - 2021, insges. 8 S.

Book chapter

Changing a running system - a guideline for retrofitting brownfield manufacturing systems

Nowacki, Natalie Samanta; Ritter, Klaus-Christoph; Lüder, Arndt; Behnert, Anna-Kristin

In: Konferenz: 26th IEEE International Conference on Emerging Technologies and Factory Automation, ETFA, Vasteras, Sweden, 7-10 September 2021, 2021 26th IEEE International Conference on Emerging Technologies and Factory Automation (ETFA)/ IEEE International Conference on Emerging Technologies and Factory Automation - [Piscataway, NJ]: IEEE . - 2021, insges. 4 S.

Book chapter

Analysis of the reusability of modules in the final automotive assembly

Herzog, Jan; Röpke, Hannes; Lüder, Arndt

In: Konferenz: 26th IEEE International Conference on Emerging Technologies and Factory Automation, ETFA, Vasteras, Sweden, 7-10 September 2021, 2021 26th IEEE International Conference on Emerging Technologies and Factory Automation (ETFA)/ IEEE International Conference on Emerging Technologies and Factory Automation - [Piscataway, NJ]: IEEE . - 2021, insges. 8 S.

Book chapter

Automated model transformation in modeling digital twins of industrial internet-of-things applications utilizing AutomationML

Binder, Christoph; Calà, Ambra; Vollmar, Jan; Neureiter, Christian; Lüder, Arndt

In: Konferenz: 26th IEEE International Conference on Emerging Technologies and Factory Automation, ETFA, Vasteras, Sweden, 7-10 September 2021, 2021 26th IEEE International Conference on Emerging Technologies and Factory Automation (ETFA)/ IEEE International Conference on Emerging Technologies and Factory Automation - [Piscataway, NJ]: IEEE . - 2021, insges. 6 S.

Book chapter

Enabling model-based requirements engineering in a complex industrial system of systems environment

Binder, Christoph; Polanec, Katharina; Brankovic, Boris; Neureiter, Christian; Lastro, Goran; Lüder, Arndt

In: Konferenz: 26th IEEE International Conference on Emerging Technologies and Factory Automation, ETFA, Vasteras, Sweden, 7-10 September 2021, 2021 26th IEEE International Conference on Emerging Technologies and Factory Automation (ETFA)/ IEEE International Conference on Emerging Technologies and Factory Automation - [Piscataway, NJ]: IEEE . - 2021, insges. 6 S.

Book chapter

Multi-view-model risk assessment in cyber-physical production systems engineering

Biffl, Stefan; Lüder, Arndt; Meixner, Kristof; Rinker, Felix; Eckhardt, Matthis; Winkler, Dietmar

In: Konferenz: MODELSWARD was, exceptionally, held as a web-based event due to the COVID-19 pandemic, from 810 February, 2021, MODELSWARD 2021 - [Setúbal, Portugal]: SCITEPRESS - Science and Technology Publications, Lda.; Hammoudi, Slimane . - 2021, S. 163-170

Book chapter

An Industry 4.0 asset-based coordination artifact for production Systems Engineering

Biffl, Stefan; Musil, Jürgen; Musil, Angelika; Meixner, Kristof; Lüder, Arndt; Rinker, Felix; Weyns, Danny; Winkler, Dietmar

In: Konferenz: 2021 IEEE 23rd Conference on Business Informatics, CBI, Bolzano, Italy, 1-3 September 2021, 2021 IEEE 23rd Conference on Business Informatics/ IEEE CBI - Piscataway, NJ: IEEE; Almeida, João Paulo A., Bd. 2 (2021), S. 92-101

Book chapter

Continuous integration in multi-view modeling - a model transformation pipeline architecture for production systems engineering

Rinker, Felix; Waltersdorfer, Laura; Meixner, Kristof; Winkler, Dietmar; Lüder, Arndt; Biffl, Stefan

In: Konferenz: MODELSWARD was, exceptionally, held as a web-based event due to the COVID-19 pandemic, from 810 February, 2021, MODELSWARD 2021 - [Setúbal, Portugal]: SCITEPRESS - Science and Technology Publications, Lda.; Hammoudi, Slimane . - 2021, S. 286-293

Book chapter

Bereitstellungsmethoden von ungeordneten Werkstücken in den automobilen Produktionsprozess

Sarna, M.; Weist, J.; Tegtmeier, A.; Lüder, Arndt

In: Automation 2021 / Leitkongress der Mess- und Automatisierungstechnik , 2021 , 1. Auflage - Düsseldorf : VDI Verlag, S. 117-130 - (VDI-Berichte; Band 2392)

Book chapter

Patterns for reuse in production systems engineering

Meixner, Kristof; Lüder, Arndt; Herzog, Jan; Winkler, Dietmar; Biffl, Stefan; Doppler, Christian

In: Proceedings SEKE 2021, the 33rd International Conference on Software Engineering & Knowledge Engineering/ International Conference on Software Engineering and Knowledge Engineering - Pittsburgh, PA: KSI Research Inc. and Knowledge Systems Institute Graduate School; SEKE (Veranstaltung:33.:2021) . - 2021, S. 37-44

Book chapter

Modelling of behaviour

Lüder, Arndt; Schmidt, Nicole; Drath, Rainer

In: AutomationML - Berlin: De Gruyter Oldenbourg; Drath, Rainer . - 2021, S. 213-234

Book chapter

Serialization of the asset administration shell by AutomationML

Lüder, Arndt; Graf, Andreas; Müller, Matthias; Schleipen, Miriam; Wiegand, Mathias; Biffl, Stefan; Drath, Rainer

In: AutomationML - Berlin: De Gruyter Oldenbourg; Drath, Rainer . - 2021, S. 365-378

Book chapter

Engineering data logistics based on AML

Lüder, Arndt; Biffl, Stefan; Rinker, Felix; Behnert, Anna-Kristin

In: AutomationML - Berlin: De Gruyter Oldenbourg; Drath, Rainer . - 2021, S. 579-602

Book chapter

Utilizing an enterprise architecture framework for model-based industrial systems engineering

Binder, Christop; Leiter, Werner; Joebstl, Oliver; Mair, Lukas; Neureiter, Christian; Lüder, Arndt

In: Konferenz: IEEE 19th International Conference on Industrial Informatics, INDIN, Palma de Mallorca, Spain, 21-23 July 2021, 2021 IEEE 19th International Conference on Industrial Informatics (INDIN)/ IEEE International Conference on Industrial Informatics - Piscataway, NJ: IEEE . - 2021, insges. 6 S.

Book chapter

Applying model-based co-simulation on modular production units in complex automation systems

Binder, Christoph; Agic, Adnan; Neureiter, Christian; Lüder, Arndt

In: Symposium: International Symposium on Systems Engineering, ISSE, Vienna, Austria,September 13 - October 13, 2021, 2021 IEEE International Symposium on Systems Engineering (ISSE) - Piscataway, NJ: IEEE . - 2021, insges. 6 S.

Book chapter

Enabling model-based engineering of service-oriented architectures within complex industrial systems

Binder, Christoph; Lastro, Goran; Neureiter, Christian; Lüder, Arndt

In: Symposium: International Symposium on Systems Engineering, ISSE, Vienna, Austria,September 13 - October 13, 2021, 2021 IEEE International Symposium on Systems Engineering (ISSE) - Piscataway, NJ: IEEE . - 2021, insges. 6 S.

Book chapter

Migrating engineering tools towards an AutomationML-based engineering pipeline

Behnert, Anna-Kristin; Rinker, Felix; Lüder, Arndt; Biffl, Stefan

In: Konferenz: IEEE 19th International Conference on Industrial Informatics, INDIN, Palma de Mallorca, Spain, 21-23 July 2021, 2021 IEEE 19th International Conference on Industrial Informatics (INDIN)/ IEEE International Conference on Industrial Informatics - Piscataway, NJ: IEEE . - 2021, insges. 7 S.

Book chapter

25 AML-based enterprise control system integration by IEC 62264

Wally, Bernhard; Lüder, Arndt

In: AutomationML - Berlin: De Gruyter Oldenbourg; Drath, Rainer . - 2021, S. 451-466

Peer-reviewed journal article

Decision support for frugal products and production systems based on Product-Process-Resource-Skill & Variability models

Fidan, Yazgül; Lüder, Arndt; Meixner, Kristof; Baumann, Laura; Arlinghaus, Julia C.

In: Procedia CIRP/ CIRP - The International Academy for Production Engineering - Amsterdam [u.a.]: Elsevier, Bd. 104 (2021), S. 1619-1625

Peer-reviewed journal article

Towards a domain-specific approach enabling tool-supported Model-Based Systems Engineering of complex industrial internet-of-things applications

Binder, Christoph; Neureiter, Christian; Lüder, Arndt

In: Systems - Basel: MDPI, Bd. 9 (2021), 2

Scientific monograph

Industry 4.0 asset based requirements tracing in cyber-physical production system engineering

Biffl, Stefan; Meixner, Kristof; Lüder, Arndt; Herzog, Jan; Rinker, Felix; Behnert, Anna-Kristin; Winkler, Dietmar

In: 2021, 1 Online-Ressource - (Technical Report; No. CDL-SQI 2021-07)

Scientific monograph

Quantitative performance parameters for industrial bin picking applications

Sarna, Matthias; Weist, Jens; Meixner, Kristof; Lüder, Arndt

In: Wien: Technische Universität, 2021, 1 Online-Ressource - (Technical Report; No. CDL-SQI 2021-11)

2020

Book chapter

Allocation of PPRS for the plant planning in the final automotive assembly

Herzog, Jan; Röpke, Hannes; Lüder, Arndt

In: Konferenz: ETFA 2020 : IEEE International Conference on Emerging Technologies and Factory Automation, Vienna, 2020.09.08-11, 2020 IEEE 25th International Conference on Emerging Technologies and Factory Automation (ETFA)/ IEEE International Conference on Emerging Technologies and Factory Automation - Piscataway, NJ: IEEE; IEEE International Conference on Emerging Technologies and Factory Automation (25.:2020) . - 2020, S. 813-820

Book chapter

Elektronische Datenverarbeitung - agentenbasiertes Steuern

Lüder, Arndt; Vogel-Heuser, Birgit

In: Dubbel Taschenbuch für den Maschinenbau 2 - Berlin: Springer Berlin; Bender, Beate . - 2020, S. 143-150

Book chapter

Management der Produktvarianz in der Anlagenplanung der Automobilendmontage unter Nutzung der PPRS Modellierung

Herzog, J.; Röpke, H.; Lüder, Arndt

In: Automation 2020/ Leitkongress der Mess- und Automatisierungstechnik - Düsseldorf: VDI Verlag GmbH . - 2020, S. 549-564

Book chapter

Vom modelgetriebenen Engineering zum Asset-Information-Model

Lutz, J.; Lüder, Arndt

In: Automation 2020/ Leitkongress der Mess- und Automatisierungstechnik - Düsseldorf: VDI Verlag GmbH . - 2020, S. 957-970

Book chapter

Towards model consistency representations in a multi-disciplinary engineering network

Winkler, Dietmar; Lüder, Arndt; Meixner, Kristof; Rinker, Felix; Biffl, Stefan

In: Konferenz: ETFA 2020 : IEEE International Conference on Emerging Technologies and Factory Automation, Vienna, 2020.09.08-11, 2020 IEEE 25th International Conference on Emerging Technologies and Factory Automation (ETFA)/ IEEE International Conference on Emerging Technologies and Factory Automation - Piscataway, NJ: IEEE; IEEE International Conference on Emerging Technologies and Factory Automation (25.:2020) . - 2020, S. 1413-1416

Book chapter

Modeling expert knowledge for optimal CPPS resource selection for a product portfolio

Meixner, Kristof; Lüder, Arndt; Herzog, Jan; Röpke, Hannes; Biffl, Stefan

In: Konferenz: ETFA 2020 : IEEE International Conference on Emerging Technologies and Factory Automation, Vienna, 2020.09.08-11, 2020 IEEE 25th International Conference on Emerging Technologies and Factory Automation (ETFA)/ IEEE International Conference on Emerging Technologies and Factory Automation - Piscataway, NJ: IEEE; IEEE International Conference on Emerging Technologies and Factory Automation (25.:2020) . - 2020, S. 1687-1694

Book chapter

Towards a domain-specific language for product-process-resource constraints

Meixner, Kristof; Decker, J.; Marcher, H.; Lüder, Arndt; Biffl, Stefan

In: Konferenz: ETFA 2020 : IEEE International Conference on Emerging Technologies and Factory Automation, Vienna, 2020.09.08-11, 2020 IEEE 25th International Conference on Emerging Technologies and Factory Automation (ETFA)/ IEEE International Conference on Emerging Technologies and Factory Automation - Piscataway, NJ: IEEE; IEEE International Conference on Emerging Technologies and Factory Automation (25.:2020) . - 2020, S. 1405-1408

Book chapter

Paving pathways for digitalization in engineering - common concepts in engineering chains

Lüder, Arndt; Baumann, Laura; Behnert, Anna-Kristin; Rinker, Felix; Biffl, Stefan

In: Konferenz: ETFA 2020 : IEEE International Conference on Emerging Technologies and Factory Automation, Vienna, 2020.09.08-11, 2020 IEEE 25th International Conference on Emerging Technologies and Factory Automation (ETFA)/ IEEE International Conference on Emerging Technologies and Factory Automation - Piscataway, NJ: IEEE; IEEE International Conference on Emerging Technologies and Factory Automation (25.:2020) . - 2020, S. 1401-1404

Book chapter

Generating Industry 4.0 asset administration shells with data from engineering data logistics

Lüder, Arndt; Behnert, Anna-Kristin; Rinker, Felix; Biffl, Stefan

In: Konferenz: ETFA 2020 : IEEE International Conference on Emerging Technologies and Factory Automation, Vienna, 2020.09.08-11, 2020 IEEE 25th International Conference on Emerging Technologies and Factory Automation (ETFA)/ IEEE International Conference on Emerging Technologies and Factory Automation - Piscataway, NJ: IEEE; IEEE International Conference on Emerging Technologies and Factory Automation (25.:2020) . - 2020, S. 867-874

Book chapter

Efficient test case generation from product and process model properties and preconditions

Meixner, Kristof; Kathrein, L.; Winkler, Dietmar; Lüder, Arndt; Biffl, Stefan

In: Konferenz: ETFA 2020 : IEEE International Conference on Emerging Technologies and Factory Automation, Vienna, 2020.09.08-11, 2020 IEEE 25th International Conference on Emerging Technologies and Factory Automation (ETFA)/ IEEE International Conference on Emerging Technologies and Factory Automation - Piscataway, NJ: IEEE; IEEE International Conference on Emerging Technologies and Factory Automation (25.:2020) . - 2020, S. 859-866

Book chapter

Lessons learned from developing industrial applications according to RAMI 4.0 by applying model based systems engineering

Binder, Christoph; Brankovič, Boris; Neureiter, Christian; Lüder, Arndt

In: Konferenz: ETFA 2020 : IEEE International Conference on Emerging Technologies and Factory Automation, Vienna, 2020.09.08-11, 2020 IEEE 25th International Conference on Emerging Technologies and Factory Automation (ETFA)/ IEEE International Conference on Emerging Technologies and Factory Automation - Piscataway, NJ: IEEE; IEEE International Conference on Emerging Technologies and Factory Automation (25.:2020) . - 2020, S. 883-888

Book chapter

Serialisierung der Verwaltungsschale einer Industrie 4.0 Komponente mit AutomationML

Boss, Birgit; Gatterburg, Andreas; Hofmeister, Michael; Lüder, Arndt; Müller, Matthias; Schleipen, Miriam; Wiegand, Matthias

In: Entwurf komplexer Automatisierungssysteme: EKA 2020 : Beschreibungsmittel, Methoden, Werkzeuge und Anwendungen : 16. Fachtagung mit Spezial-Workshop "Modellierungsansätze für eine semantische Interoperabilität in industriellen Sytemen" : 2020 [in Magdeburg] : [Abstracts] / Institut für Automation und Kommunikation e.V. An-Institut der Otto-von-Guericke-Universität Magdeburg ; Ulrich Jumar, Christian Diedrich (Hrsg.)/ Fachtagung "Entwurf Komplexer Automatisierungssysteme" - Magdeburg: ifak - Institut für Automation und Kommunikation e.V. . - 2020, insges. 9 S.

Book chapter

AutomationML in a nutshell

Lüder, Arndt; Schmidt, Nicole

In: Handbuch Industrie 4.0 - Wiesbaden: Springer Fachmedien Wiesbaden; Vogel-Heuser, Birgit . - 2020, S. 1-48

Peer-reviewed journal article

Flexibility in production systems by exploiting cyberphysical systems

Lüder, Arndt

In: Computer - Los Alamitos, Calif.: IEEE Computer Soc. Publ. Off., Bd. 53 (2020), 1, S. 81-85

Peer-reviewed journal article

Quality risks in the data exchange process for collaborative CPPS engineering

Biffl, Stefan; Lüder, Arndt; Rinker, Felix; Waltersdorfer, Laura; Winkler, D.

In: IEEE Xplore digital library/ Institute of Electrical and Electronics Engineers - New York, NY: IEEE . - 2019, S. 1217-1224, 2020

Peer-reviewed journal article

Product/ion-aware modeling approaches that support tracing design decisions

Kathrein, Lukas; Meixner, K.; Winkler, D.; Lüder, Arndt; Biffl, Stefan

In: IEEE Xplore digital library/ Institute of Electrical and Electronics Engineers - New York, NY: IEEE . - 2019, S. 118-125, 2020

2019

Book chapter

Key directions for industrial agent based cyber-physical production systems

Karnouskos, Stamatis; Ribeiro, Luis; Leitão, Paulo; Lüder, Arndt; Vogel-Heuser, Birgit

In: IEEE Xplore digital library - New York, NY : IEEE . - 2019, S. 17-22 [ Published in: 2019 IEEE International Conference on Industrial Cyber Physical Systems (ICPS)]

Book chapter

A meta-model for representing consistency as extension to the formal process description

Kathrein, Lukas; Meixner, Kristof; Winkler, Dietmar; Lüder, Arndt; Biffl, Stefan

In: IEEE Xplore digital library - New York, NY : IEEE . - 2019, S. 1653-1656 [ Published in: 2019 24th IEEE International Conference on Emerging Technologies and Factory Automation (ETFA)]

Book chapter

Extending the formal process description towards consistency in product/ion-aware modeling

Kathrein, Lukas; Meixner, Kristof; Winkler, Dietmar; Lüder, Arndt; Biffl, Stefan

In: IEEE Xplore digital library - New York, NY : IEEE . - 2019, S. 679-686 [ Published in: 2019 24th IEEE International Conference on Emerging Technologies and Factory Automation (ETFA)]

Book chapter

Data exchange logistics in engineering networks exploiting automated data integration

Lüder, Arndt; Pauly, Johanna-Lisa; Rinker, Felix; Biffl, Stefan

In: IEEE Xplore digital library - New York, NY : IEEE . - 2019, S. 657-664 [ Published in: 2019 24th IEEE International Conference on Emerging Technologies and Factory Automation (ETFA)]

Book chapter

Efficient production system resource exploration considering product/ion requirements

Kathrein, Lukas; Meixner, Kristof; Winkler, Dietmar; Lüder, Arndt; Biffl, Stefan

In: IEEE Xplore digital library - New York, NY : IEEE . - 2019, S. 665-672 [ Published in: 2019 24th IEEE International Conference on Emerging Technologies and Factory Automation (ETFA)]

Book chapter

Introduction to security and quality improvement in complex Cyber-Physical Systems engineering

Biffl, Stefan; Eckhart, Matthias; Lüder, Arndt; Weippl, Edgar

In: Security and quality in Cyber-Physical Systems engineering - Cham: Springer Nature Switzerland AG; Biffl, Stefan . - 2019, S. 1-29

Book chapter

Conclusion and outlook on security and quality of complex Cyber-Physical Systems engineering

Biffl, Stefan; Eckhart, Matthias; Lüder, Arndt; Weippl, Edgar

In: Security and quality in Cyber-Physical Systems engineering - Cham: Springer Nature Switzerland AG; Biffl, Stefan . - 2019, S. 497-507

Book chapter

Engineering data logistics for agile automation systems engineering

Biffl, Stefan; Lüder, Arndt; Rinker, Felix; Waltersdorfer, Laura; Winkler, Dietmar

In: Security and quality in Cyber-Physical Systems engineering - Cham: Springer Nature Switzerland AG; Biffl, Stefan . - 2019, S. 187-225

Book chapter

Product/ion-aware analysis of collaborative systems engineering processes

Kathrein, Lukas; Lüder, Arndt; Meixner, Kristof; Winkler, Dietmar; Biffl, Stefan

In: Security and quality in Cyber-Physical Systems engineering - Cham: Springer Nature Switzerland AG; Biffl, Stefan . - 2019, S. 151-185

Book chapter

Multi-disciplinary engineering of production systems - challenges for quality of control software

Lüder, Arndt; Pauly, Johanna-Lisa; Kirchheim, Konstantin

In: Konferenz: 11th International Conference, SWQD 2019, Vienna, Austria, January 15-18 2019, Software Quality: The Complexity and Challenges of Software Engineering and Software Quality in the Cloud - Cham: Springer International Publishing . - 2019, S. 3-13

Book chapter

Efficient engineering data exchange in multi-disciplinary systems engineering

Biffl, Stefan; Lüder, Arndt; Rinker, Felix; Waltersdorfer, Laura

In: Advanced Information Systems Engineering - Cham: Springer . - 2019, S. 17-31

Book chapter

Managing complexity within the engineering of product and production systems

Mehr, Rostami; Lüder, Arndt

In: Security and quality in Cyber-Physical Systems engineering - Cham: Springer Nature Switzerland AG; Biffl, Stefan . - 2019, S. 57-79

Book chapter

Concept for deriving system architectures from reference architectures

Unverdorben, S.; Böhm, B.; Lüder, Arndt

In: Konferenz: 2019 IEEE International Conference on Industrial Engineering and Engineering Management (IEEM), 2019 IEEE International Conference on Industrial Engineering and Engineering Management/ IEEE International Conference on Industrial Engineering and Engineering Management - [Piscataway, NJ]: IEEE, (2019), INSPEC Accession Number: 19318071

Book chapter

Supporting the data model integrator in an engineering network by automating data integration

Lüder, Arndt; Kirchheim, Konstantin; Pauly, Johanna-Lisa; Biffl, Stefan; Waltersdorfer, Laura

In: IEEE Xplore digital library / Institute of Electrical and Electronics Engineers - New York, NY : IEEE . - 2019, S. 1229-1234 [Konferenz: 2019 IEEE 17th International Conference on Industrial Informatics (INDIN), 22-25 July 2019, Helsinki, Finland]

Peer-reviewed journal article

Durchgängige Modellierung von Produktionssystemen - Daten für den Anlagenrückbau

Schmidt, Nicole; Lüder, Arndt

In: Automatisierungstechnik - Berlin: De Gruyter, Bd. 67 (2019), 3, S. 232-245

Peer-reviewed journal article

Cyber-physical production systems architecture based on multi-agents design pattern - comparison of selected approaches mapping four agent patterns

Cruz Salazar, Luis Alberto; Ryashentseva, Daria; Lüder, Arndt; Vogel-Heuser, Birgit

In: The international journal of advanced manufacturing technology - London: Springer . - 2019, insges. 30 S.

Peer-reviewed journal article

System architectures for Industrie 4.0 applications

Trunzer, Emanuel; Calà, Ambra; Leitão, Paulo; Gepp, Michael; Kinghorst, Jakob; Lüder, Arndt; Schauerte, Hubertus; Reifferscheid, Markus; Vogel-Heuser, Birgit

In: Production engineering - Berlin: Springer, Bd. 13 (2019), 3/4, S. 247-257

Dissertation

Entwicklung einer Methode zur Risikobeurteilung bei der Wiederverwendung von Entwurfselementen im Anlagenengineering

Röpke, Hannes; Lüder, Arndt; Katterfeld, André

In: Magdeburg, 2019, XIV, 176, XV-XVIII Blätter, Illustrationen, Diagramme, 30 cm

Dissertation

A novel migration approach towards decentralized automation in cyber-physical production systems

Calà, Ambra; Lüder, Arndt

In: Magdeburg, 2019, xx, 149 Seiten, Diagramme, 30 cm

Editor

Security and quality in Cyber-Physical Systems engineering

Biffl, Stefan; Eckhart, Matthias; Lüder, Arndt; Weippl, Edgar

In: Cham: Springer Nature Switzerland AG, 2019, xxv, 507 Seiten, Illustrationen - (Springer eBook Collection)

Scientific monograph

Agenten zur Realisierung von Industrie 4.0 - VDI-Statusreport : Juli 2019

Fay, Alexander; Gehlhoff, Felix; Seitz, Matthias; Vogel-Heuser, Birgit; Baumgärtel, Hartwick; Diedrich, Christian; Lüder, Arndt; Schöler, Thorsten; Sutschet, Gerhard; Verbeet, Gerhard

In: Düsseldorf: VDI, 2019, 1 Online-Ressource (24 Seiten, 1,65 MB), Illustrationen

2018

Book chapter

Design pattern for agent based production system control - a survey

Lüder, Arndt; Calà, Ambra; Zawisza, Jacek; Rosendahl, Ronald

In: 2017 13th IEEE International Conference on Automation Science and Engineering (CASE) - Piscataway, NJ: IEEE; IEEE International Conference on Automation Science and Engineering (13.:2017), S. 717-722, 2018[Konferenz: 13th IEEE International Conference on Automation Science and Engineering, CASE, Xi'an, China, 20-23 August 2017]

Book chapter

Identifying design pattern for agent based production system control

Lüder, Arndt; Zawisza, Jacek; Cruz S. Luis, A.; Seitz, Matthias; Vogel-Heuser, Birgit

In: IECON 2018 - 44th Annual Conference of the IEEE Industrial Electronics Society - Piscataway, NJ: IEEE, S. 2896-2901[Konferenz: 44th Annual Conference of the IEEE Industrial Electronics Society, IECON 2018, Washington, DC, USA, 21-23 October 2018]

Book chapter

Elektronische Datenverarbeitung Agentenbasiertes Steuern

Lüder, Arndt; Vogel-Heusser, Birgit; Göhner, Peter

In: Taschenbuch für den Maschinenbau - Berlin: Springer Vieweg, S. 2019-2033, 2018

Book chapter

Agentenmuster für flexible und rekonfigurierbare Industrie 4.0/CPS-Automatisierungs- bzw. Energiesysteme

Vogel-Heuser, B.; Ryashentseva, D.; Hoffmann, M.; Brehm, R.; Bruce-Boye, C.; Lüder, Arndt

In: 19. Leitkongress der Mess- und Automatisierungstechnik: Seamless Convergence of Automation & IT : Automation : Baden-Baden, 03. und 04. Juli 2018 - Düsseldorf: VDI Verlag GmbH, S. 1119-1131[Kongress: 19. Leitkongress der Mess- und Automatisierungstechnik, 2018]

Book chapter

Robotic Process Automation (RPA) im Engineering - ein neuartiges Konzept zur Automatisierung von Toolprozessketten durch Ingenieure

Lutz, J.; Lüder, Arndt

In: 19. Leitkongress der Mess- und Automatisierungstechnik: Seamless Convergence of Automation & IT : Automation : Baden-Baden, 03. und 04. Juli 2018 - Düsseldorf: VDI Verlag GmbH, S. 759-772[Kongress: 19. Leitkongress der Mess- und Automatisierungstechnik, 2018]

Book chapter

Towards Smart Factory - Multi-Agent integration on industrial standards for service-oriented communication and semantic data exchange

Rosendahl, Ronald; Calà, Ambra; Kirchheim, Konstantin; Lüder, Arndt; D'Agostino, Nikolai

In: WOA 2018, 19th Workshop "From Objects to Agents" - Aachen, Germany: RWTH Aachen; Workshop "From Objects to Agents" (19.:2018), S. 124-132[Konferenz: WOA 2018]

Book chapter

Development and evaluation of a unified agents- and supervisory control theory based manufacturing control system

Ryashentseva, Daria; Cruiz, Luis A.; Vogel-heuser, B.; Lüder, Arndt

In: 2018 14th IEEE International Conference on Automation Science and Engineering (CASE 2018): Munich, Germany 20 - 24 August 2018$h - Piscataway, NJ: IEEE, S. 187-192[Kongress: CASE 2018]

Book chapter

Reference architectures for future production systems in the field of discrete manufacturing

Unverdorben, Stephan; Böhm, Birthe; Lüder, Arndt

In: 2018 14th IEEE International Conference on Automation Science and Engineering (CASE 2018): Munich, Germany 20 - 24 August 2018$h - Piscataway, NJ: IEEE, S. 869-874[Kongress: CASE 2018]

Book chapter

Modelling consistency rules within production system engineering

Lüder, Arndt; Pauly, Johanna-Lisa; Wimmer, Manuel

In: 2018 14th IEEE International Conference on Automation Science and Engineering (CASE 2018): Munich, Germany 20 - 24 August 2018$h - Piscataway, NJ: IEEE, S. 664-667[Kongress: CASE 2018]

Book chapter

Support for engineering chain migration towards multi-disciplinary engineering chains

Lüder, Arndt; Pauly, Johanna-Lisa; Rosendahl, Ronald; Biffl, Stefan; Rinker, Felix

In: 2018 14th IEEE International Conference on Automation Science and Engineering (CASE 2018): Munich, Germany 20 - 24 August 2018$h - Piscataway, NJ: IEEE, S. 671-674[Kongress: CASE 2018]

Book chapter

Application of design pattern within the engineering of agent-based control systems

Zawisza, Jacek; Lüder, Arndt; Rosendahl, Ronald

In: 2018 14th IEEE International Conference on Automation Science and Engineering (CASE 2018) - Piscataway, NJ: IEEE; IEEE International Conference on Automation Science and Engineering (14:2018), S. 181-186[Kongress: CASE 2018]

Book chapter

Designing cooperating multi-agent systems - an extended design methodology

Zavisa, Jacek; Lüder, Arndt; Calà, Ambra

In: Proceedings 2018 IEEE Industrial Cyber-Physical Systems (ICPS) - Piscataway, NJ: IEEE; IEEE International Conference on Industrial Cyber-Physical Systems (1.:2018), S. 252-257[Konferenz: 2018 IEEE Industrial Cyber-Physical Systems, ICPS, Saint Petersburg, Russia, 15-18 May 2018]

Book chapter

Migration towards digital manufacturing automation - an assessment approach

Lüder, Arndt; Calà, Ambra; Boschi, Filippo; Tavola, Giacomo; Taisch, Marco

In: Proceedings 2018 IEEE Industrial Cyber-Physical Systems (ICPS) - Piscataway, NJ: IEEE; IEEE International Conference on Industrial Cyber-Physical Systems (1.:2018), S. 714-719[Konferenz: 2018 IEEE Industrial Cyber-Physical Systems, ICPS, Saint Petersburg, Russia, 15-18 May 2018]

Book chapter

One step towards an industry 4.0 component

Lüder, Arndt; Schleipen, M.; Schmidt, Nicole; Pfrommer, J.; Henßen, R.

In: 2017 13th IEEE International Conference on Automation Science and Engineering (CASE): 20-23 Aug. 2017 - Piscataway, NJ: IEEE, S. 1268-1273, 2018[Konferenz: 13th IEEE International Conference on Automation Science and Engineering, CASE, Xi'an, China, 20-23 August 2017]

Peer-reviewed journal article

Model-based generation of run-time data collection systems exploiting AutomationML

Mazak, Alexandra; Lüder, Arndt; Wolny, Sabine; Wimmer, Manuel; Winkler, Dietmar; Kirchheim, Konstantin; Rosendahl, Ronald; Bayanifar, Hessamedin; Biffl, Stefan

In: Automatisierungstechnik: AT - Berlin: De Gruyter, Bd. 66.2018, 10, S. 819-833

Peer-reviewed journal article

The flow and reuse of data - capabilities of AutomationML in the Production System Life Cycle

Schmidt, Nicole; Lüder, Arndt

In: IEEE industrial electronics magazine - New York, NY: IEEE, Bd. 12.2018, 2, S. 59-63

Dissertation

Recovery planning method for production systems

Schmidt, Nicole; Lüder, Arndt

In: Magdeburg, 2018, verschiedene Seitenzählung, Illustrationen, Tabellen[Literaturverzeichnis: Seite 137-157]

Dissertation

Methoden der projektübergreifenden Wiederverwendung im Anlagenentwurf - Konzeptionierung und Realisierung in der Automobilindustrie

Hell, Kristofer; Lüder, Arndt; Grote, Karl-Heinrich

In: Magdeburg, 2018, XVII, 194 Seiten, Illustrationen, Diagramme, 30 cm[Literaturverzeichnis: Seite 178-190]

Dissertation

Entwicklung und Integration interdependenter Agentensysteme zur dezentralen Produktionsplanung und -steuerung

Zawisza, Jacek; Lüder, Arndt; Werner, Frank

In: Magdeburg, 2018, XIX, 269 Seiten, Diagramme, 30 cm[Literaturverzeichnis: Seite 219-250]

Article in conference proceedings

Durchgängige Modellierung von Produktionssystemen - Daten für den Anlagenrückbau

Schmidt, Nicole; Lüder, Arndt

In: Entwurf komplexer Automatisierungssysteme: Beschreibungsmittel, Methoden, Werkzeuge und Anwendungen : EKA 2018 : 2.-3.05.2018, 15. Fachtagung mit Tutorium - Magdeburg: Institut für Automation und Kommunikation e.V. Magdeburg (An-Institut der Otto-von-Guericke-Universität Magdeburg), insges. 10 S.[Fachtagung: EKA 2018]

Article in conference proceedings

Integration kooperierender Multiagentensysteme

Zawisza, Jacek; Lüder, Arndt

In: Entwurf komplexer Automatisierungssysteme - Magdeburg: Institut für Automation und Kommunikation e.V. Magdeburg (An-Institut der Otto-von-Guericke-Universität Magdeburg), insges. 12 S., 2018[Tagung: EKA 2018 : 2.-3.05.2018, Magdeburg]

Scientific monograph

- standardized data exchange in the engineering process of production systems

Drath, Rainer; John, Michael; Lüder, Arndt; Pauly, Johanna; Prinz, Josef; Rentscher, Markus; Riedl, Matthias; Schleipen, Miriam; Schmidt, Nicole; Stecken, Jannis; Strahilov, Anton; Wally, Bernhard

In: Magdeburg: AutomationML e. V. c/o IAF, 2018, 31 Seiten

2017

Book chapter

Harmonisierung im Kontext Industrie 4.0 AutomationML und OPC UA

Schleipen, M.; Henßen, R.; Sauer, O.; D'Agostino, N.; Damm, M.; Dogan, A.; Ladiges, J.; Gössling, A.; Holm, T.; Hoppe, S.; Lüder, Arndt; Schmidt, Nicole

In: Automation 2017: technology networks processes : 18. Leitkongress der Mess- und Automatisierungstechnik : Kongresshaus Baden-Baden, 27. und 28. Juni 2017 - Düsseldorf: VDI Verlag GmbH, 2017, insgesamt 8 Seiten[Kongress: Automation 2017, Baden-Baden, 27. und 28. Juni 2017]

Book chapter

Challenges of mechatronical engineering of production systems: an automation system engineering view

Lüder, Arndt; Schmidt, Nicole

In: Math for the Digital Factory - Cham : Springer . - 2017, S. 93-114

Book chapter

Integration des Menschen in Szenarien der Industrie 4.0

Lüder, Arndt

In: Handbuch Industrie 4.0 Bd.2 , 2. Aufl. 2017 - Berlin, Heidelberg : Springer Vieweg ; Vogel-Heuser, Birgit *1961-*, S. 259-573

Book chapter

AutomationML in a Nutshell

Lüder, Arndt; Schmidt, Nicole

In: Handbuch Industrie 4.0 Bd.2 , 2. Aufl. 2017 - Berlin, Heidelberg : Springer Vieweg ; Vogel-Heuser, Birgit *1961-*, S. 213-258

Book chapter

Agentenbasierte Steuerung eines Routenzugsystems für die werksinterne Materiallogistik einer Automobilendmontage

Zawisza, Jacek; Habermann, Rebecca; Lüder, Arndt

In: 13. Magdeburger Maschinenbau-Tage 2017 - Magdeburg: Universitätsbibliothek, S. 64-73[Konferenz: MMT2017]

Book chapter

End-of-Life support for production systems

Schmidt, Nicole; Lüder, Arndt

In: 13. Magdeburger Maschinenbau-Tage 2017: autonom - vernetzt - nachhaltig, 27. und 28. September 2017 : Tagungsband - Magdeburg: Universitätsbibliothek, S. 438-444[Konferenz: MMT2017]

Book chapter

Migration from traditional towards cyber-physical production systems

Calà, Ambra; Lüder, Arndt; Cachada, Ana; Pires, Flavia; Barbosa, Jose; Leitao, Paulo; Gepp, Michael

In: 2017 IEEE 15th International Conference on Industrial Informatics (INDIN) - Piscataway, NJ: IEEE; IEEE International Conference on Industrial Informatics (15.:2017), S. 1147-1152[Konferenz: 15th International Conference on Industrial Informatics, INDIN, Emden, Germany, 24-26 July 2017]

Book chapter

Evaluation of migration scenarios towards cyber-physical production systems using SysML

Calà, Ambra; Lüder, Arndt; Vollmar, Jan; Foehr, Matthias

In: 2017 IEEE International Symposium on Systems Engineering - Piscataway, NJ: IEEE; IEEE International Symposium on Systems Engineering (3.:2017), insges. 5 S.[Symposium: IEEE International Symposium on Systems Engineering, ISSE 2017, Vienna, Austria, October 11-13, 2017]

Book chapter

Advancing the performance of complex manufacturing systems through agent-based production control

Lüder, Arndt

In: Multiagent system technologies - Cham : Springer International Publishing ; Berndt, Jan Ole . - 2017, S. 103-120

Book chapter

Identification of artifacts in life cycle phases of CPPS

Lüder, Arndt; Schmidt, Nicole; Hell, Kristofer; Röpke, Hannes; Zawisza, Jacek

In: Multi-disciplinary engineering for cyber-physical production systems - data models and software solutions for handling complex engineering projects: data models and software solutions for handling complex engineering projects - Cham, Switzerland: Springer, 2017 . - 2017, S. 139-167

Book chapter

Fundamentals of artifact reuse in CPPS

Lüder, Arndt; Schmidt, Nicole; Hell, Kristofer; Röpke, Hannes; Zawisza, Jacek

In: Multi-disciplinary engineering for cyber-physical production systems - data models and software solutions for handling complex engineering projects: data models and software solutions for handling complex engineering projects - Cham, Switzerland: Springer, 2017 . - 2017, S. 113-138

Book chapter

Conclusions and outlook on research for multi-disciplinary engineering for cyber-physical production systems

Biffl, Stefan; Gerhard, Detlef; Lüder, Arndt

In: Multi-disciplinary engineering for cyber-physical production systems: data models and software solutions for handling complex engineering projects - Cham: Springer, S. 459-486, 2017

Book chapter

Introduction to the multi-disciplinary engineering for cyber-physical production systems

Biffl, Stefan; Gerhard, Detlef; Lüder, Arndt

In: Multi-disciplinary engineering for cyber-physical production systems: data models and software solutions for handling complex engineering projects - Cham: Springer, S. 1-24, 2017

Book chapter

Standardized information exchange within production system engineering

Lüder, Arndt; Schmidt, Nicole; Drath, Rainer

In: Multi-disciplinary engineering for cyber-physical production systems: data models and software solutions for handling complex engineering projects - Cham: Springer, S. 235-257, 2017

Book chapter

Description means for information artifacts throughout the life cycle of CPPS

Lüder, Arndt; Schmidt, Nicole; Hell, Kristofer; Röpke, Hannes; Zawisza, Jacek

In: Multi-disciplinary engineering for cyber-physical production systems - data models and software solutions for handling complex engineering projects: data models and software solutions for handling complex engineering projects - Cham, Switzerland: Springer, 2017 . - 2017, S. 169-183

Peer-reviewed journal article

Development of a generic model for end-of-life scenarios of production systems

Schmidt, Nicole; Lüder, Arndt

In: Procedia manufacturing - Amsterdam [u.a.]: Elsevier, Bd. 8.2017, S. 385-392[Kongress: 14th Global Conference on Sustainable Manufacturing, GCSM 3-5 October 2016, Stellenbosch, South Africa]

Dissertation

Zur Internationalisierung von Engineering für Großanlagen in der Elektroindustrie

Schäffler, Thomas; Lüder, Arndt; Vajna, Sándor

In: Magdeburg, 2017, xxxiv, 284 Seiten, Illustrationen, Diagramme, 30 cm[Literaturverzeichnis: Seite 255-284]

Editor

Multi-disciplinary engineering for cyber-physical production systems - data models and software solutions for handling complex engineering projects

Biffl, Stefan; Lüder, Arndt; Gerhard, Detlef

In: Cham, Switzerland: Springer, 2017, xii, 472 Seiten, Illustrationen, Diagramme, 25 cm

2016

Abstract

Development of a generic model for End-of-Life scenarios of production systems

Schmidt, Nicole; Lüder, Arndt

In: 14th Global Conference on Sustainable Manufacturing Decoupling Growth from Resource Use: Stellenbosch, South Africa, 3rd - 5th October, 2016 ; abstract book - CIRP, S. 44[Kongress: 14th Global Conference on Sustainable Manufacturing Decoupling Growth from Resource Use, Stellenbosch, South Africa, 3rd - 5th October, 2016]

Book chapter

A generic model for the end-of-life phase of production systems

Schmidt, Nicole; Lüder, Arndt; Hell, Kristofer; Röpke, Hannes; Zawisza, Jacek

In: Kongress: 42th Annual Conference of the IEEE Industrial Electronics Society, Florence, Italy, 24. - 27. October, 2016, IECON 2016 - Piscataway, NJ: IEEE . - 2016, S. 5693-5698

Book chapter

Identification of "Industrie 4.0" component hierarchy layers

Röpke, Hannes; Hell, Kristofer; Zawisza, Jacek; Lüder, Arndt; Schmidt, Nicole

In: Kongress: 21th IEEE Conference on Emerging Technologies and Factory Automation (ETFA),Berlin, 6 - 9 September, 2016, 21th IEEE Conference on Emerging Technologies and Factory Automation (ETFA) - Piscataway, NJ: IEEE . - 2016, insges. 8 S.

Book chapter

Lossless exchange of automation project configuration data

Lüder, Arndt; Schmidt, Nicole; John, Michael

In: 21th IEEE Conference on Emerging Technologies and Factory Automation (ETFA): September 6 - 9, 2016, Berlin - Piscataway, NJ: IEEE, insges. 8 S.[Kongress: 21th IEEE Conference on Emerging Technologies and Factory Automation (ETFA),Berlin, 6 - 9 September, 2016]

Book chapter

Modeling approach for a flexible manufacturing control system

Calà, Ambra; Ryashentseva, Daria; Lüder, Arndt

In: 21th IEEE Conference on Emerging Technologies and Factory Automation (ETFA) - Piscataway, NJ: IEEE, 2016 . - 2016, insges. 4 S.[Kongress: 21th IEEE Conference on Emerging Technologies and Factory Automation (ETFA),Berlin, 6 - 9 September, 2016]

Book chapter

Qualitätsorientierte Modellierung von Produktionssystemverhalten

Lüder, Arndt; Schmidt, Nicole; Calà, Ambra; Ryashentseva, Daria; Schulz, Nadine

In: Entwurf komplexer Automatisierungssysteme - EKA 2016 ; Beschreibungsmittel, Methoden, Werkzeuge und Anwendungen ; 14. Fachtagung mit Tutorium ; 24. bis 25. Mai 2016 in Magdeburg: EKA 2016 ; Beschreibungsmittel, Methoden, Werkzeuge und Anwendungen ; 14. Fachtagung mit Tutorium ; 24. bis 25. Mai 2016 in Magdeburg/ EKA - Magdeburg: Inst. für Automation und Kommunikation e.V., 2016 . - 2016, insges. 15 S.[Beitrag auf USB-Stick]

Book chapter

Updating probabilistic method of the fuzzy control model's parameters of the production facilities

Finaev, Valery; Sinjavskaya, Ekaterina; Lüder, Arndt; Ryashentseva, Daria

In: 21th IEEE Conference on Emerging Technologies and Factory Automation (ETFA): September 6 - 9, 2016, Berlin - Piscataway, NJ: IEEE, 2016 . - 2016, insges. 7 S.[Kongress: 21th IEEE Conference on Emerging Technologies and Factory Automation (ETFA),Berlin, 6 - 9 September, 2016]

Book chapter

Generische Strukturierung von Produktionssystemen der Fertigungsindustrie

Zawisza, J.; Hell, K.; Röpke, H.; Lüder, Arndt; Schmidt, Nicole

In: Automation 2016: 17. Branchentreff der Mess- und Automatisierungstechnik : secure & reliable in the digital world : Kongresshaus Baden-Baden, 07. und 08. Juni 2016 - Düsseldorf: VDI Verlag GmbH, insges. 16 S. - (VDI-Berichte; 2284)[Kongress: Automation 2016, 07. und 08. Juni 2016, Baden-Baden]

Book chapter

Herstellerunabhängiger Austausch von Verhaltensmodellen mittels AutomationML

Lüder, Arndt; Schmidt, Nicole; Yemenicioglu, Ender

In: Automation 2016: 17. Branchentreff der Mess- und Automatisierungstechnik : secure & reliable in the digital world : Kongresshaus Baden-Baden, 07. und 08. Juni 2016 - Düsseldorf: VDI Verlag GmbH, insges. 16 S. - (VDI-Berichte; 2284)[Kongress: Automation 2016, 07. und 08. Juni 2016, Baden-Baden]

Book chapter

Multi-disciplinary engineering for Industrie 4.0 - semantic challenges and needs

Biffl, Stefan; Lüder, Arndt; Winkler, Dietmar

In: Semantic web technologies for intelligent engineering applications - Cham: Springer International Publishing, S. 17-51, 2016

Book chapter

Demands on virtual representation of physical Industrie 4.0 components

Hell, Kristofer; Hillmann, Robin; Lüder, Arndt; Röpke, Hannes; Zawisza, Jacek; Schmidt, Nicole; Calà, Ambra

In: Kongress: 2nd INCOSE Italia Conference on Systems Engineering, Turin, Italy, November 14-16, 2016, CEUR workshop proceedings - Aachen: RWTH, Bd. 1728 (2016), S. 65-71

Book chapter

Analyzing the causes and effects of complexity on different levels of automobile manufacturing systems

Mir Rashed, Seyedarya; Rostami Mehr, Mohammad; Mißler-Behr, Magdalena; Lüder, Arndt

In: 21th IEEE Conference on Emerging Technologies and Factory Automation (ETFA): September 6 - 9, 2016, Berlin - Piscataway, NJ: IEEE, insges. 4 S.[Kongress: 21th IEEE Conference on Emerging Technologies and Factory Automation (ETFA),Berlin, 6 - 9 September, 2016]

Peer-reviewed journal article

Wiederverwendung im Engineering

Hell, Kristofer; Lüder, Arndt

In: Zeitschrift für wirtschaftlichen Fabrikbetrieb: ZWF - München: Hanser, 6, S. 337-341, 2016

Peer-reviewed journal article

Cross-disciplinary engineering with AutomationML and SysML

Berardinelli, Luca; Biffl, Stefan; Lüder, Arndt; Mätzler, Emanuel; Mayerhofer, Tanja; Wimmer, Manuel; Wolny, Sabine

In: Automatisierungstechnik - Berlin : De Gruyter, Bd. 64 (2016), Heft 4, S. 253-269

Dissertation

Agents and SCT based self* control architecture for production systems

Ryashentseva, Daria; Lüder, Arndt; Kühnle, Hermann

In: Magdeburg, 2016, xxiii, 142 Seiten, Illustrationen[Literaturverzeichnis: Seite 113-121]

2015

Book chapter

Integration des Menschen in Szenarien der Industrie 4.0

Lüder, Arndt

In: Handbuch Industrie 4.0: Produktion, Automatisierung und Logistik - Wiesbaden: Springer Fachmedien Wiesbaden; Vogel-Heuser, Birgit . - 2015, insges. 15 S.

Book chapter

Exchange of engineering data for communication systems based on AutomationML using an EtherNet/IP TM example

Bendik, Falko; Lüder, Arndt; Schmidt, Nicole

In: ODVA 2015 : Industry Conference and 17th Annual Meeting. - ODVA, insges. 21 S.Kongress: ODVA Industry Conference; (Frisco, Texas) : 2015.10.13-15

Book chapter

AutomationML in a nutshell

Lüder, Arndt; Schmidt, Nicole

In: Handbuch Industrie 4.0: Produktion, Automatisierung und Logistik - Wiesbaden: Springer Fachmedien Wiesbaden; Vogel-Heuser, Birgit . - 2015, S. 1-46

Book chapter

Linking and versioning support for AutomationML - a model-driven engineering perspective

Biffl, S.; Maetzler, E.; Wimmer, M.; Lüder, Arndt; Schmidt, Nicole

In: Proceedings of the 2015 IEEE International Conference on Industrial Informatics (INDIN) - Piscataway, NJ: IEEE, S. 499-506[Beitrag auf USB-Stick]

Book chapter

Agent-based control of production systems- and its architectural challenges

Vogel-Heuser, Birgit; Göhner, Peter; Lüder, Arndt

In: Industrial agents - Amsterdam, Netherlands : Elsevier ; Leitão, Paulo . - 2015, S. 153-170

Book chapter

Herstellerunabhängiger Austausch von Entwurfsdaten für Steuerungssysteme mittels AutomationML

Lüder, Arndt; Schmidt, Nicole

In: Industrie 4.0 im internationalen Kontext: Kernkonzepte, Ergebnisse, Trends - Berlin: VDE-Verl. [u.a.], S. 107-132, 2015

Book chapter

For a better understanding of integration

Schmidt, Nicole; Lüder, Arndt; Rosendahl, Ronald; Ryashentseva, Daria; Foehr, Matthias; Vollmar, Jan

In: IECON 2015: 41th annual conference of the IEEE Industrial Electronics Societ ; Yokohama, November 9-12,2015 - Piscataway, NJ: IEEE, S. 2717-2722[Beitrag auf USB-Stick]

Book chapter

Identification and implementation of agents for factory automation exploiting mechatronical concepts for production system structuring

Lüder, Arndt; Foehr, Matthias

In: Industrial agents - Amsterdam, Netherlands : Elsevier ; Leitão, Paulo . - 2015, S. 171-190

Book chapter

AutomationML - Semantic Web technologies vs. Model-Driven Engineering

Kovalenko, Olga; Wimmer, Manuel; Sabou, Marta; Lüder, Arndt; Ekaputra, Fajar J.; Biffl, Stefan

In: 20th IEEE Conference on Emerging Technologies and Factory Automation (ETFA): September 8 - 11, 2015, Luxembourg - Piscataway, NJ: IEEE, insges. 4 S.

Book chapter

Industrie 4.0 Wertschöpfungsnetzwerke in Bestandsanlagen

Rosendahl, Ronald; Lüder, Arndt; Ryashentseva, Daria; Schmidt, Nicole

In: Automation 2015: 16. Branchentreff der Mess- und Automatisierungstechnik, 11. und 12. Juni 2015, Baden-Baden/ Branchentreff der Mess- und Automatisierungstechnik - Düsseldorf: VDI-Verl., S. 987

Book chapter

Objektivierung der Prozess -FMEA durch den Einsatz eines Risikokubus

Röpke, Hannes; Schütze, Oliver; Lüder, Arndt

In: Smart, effizient, mobil - 12. Magdeburger Maschinenbau-Tage ; 30. September und 1. Oktober 2015 - Magdeburg: Otto-von-Guericke-Universität Magdeburg, 2015, Beitrag A8-3, insgesamt 9 S.Kongress: Magdeburger Maschinenbau-Tage 12 (Magdeburg : 2015.09.30-10.01)

Book chapter

Herstellerunabhängiger Austausch von Entwurfsdaten für Steuerungssysteme mittels AutomationML

Lüder, Arndt; Schmidt, Nicole

In: Smart, effizient, mobil - 12. Magdeburger Maschinenbau-Tage ; 30. September und 1. Oktober 2015: 12. Magdeburger Maschinenbau-Tage ; 30. September und 1. Oktober 2015/ Magdeburger Maschinenbau-Tage - Magdeburg: Otto-von-Guericke-Universität Magdeburg, 2015, Beitrag C5-1, insgesamt 16 S.Kongress: Magdeburger Maschinenbau-Tage 12 (Magdeburg : 2015.09.30-10.01)[Beitrag auf CD-ROM]

Book chapter

Austausch von Prozessbeschreibungen zwischen Engineering- und Laufzeitsystemen im Industrie 4.0 Umfeld mittels AutomationML

Lüder, Arndt; Schmidt, Nicole; Matzke, Daniel

In: Smart, effizient, mobil - 12. Magdeburger Maschinenbau-Tage ; 30. September und 1. Oktober 2015: 12. Magdeburger Maschinenbau-Tage ; 30. September und 1. Oktober 2015/ Magdeburger Maschinenbau-Tage - Magdeburg: Otto-von-Guericke-Universität Magdeburg, 2015, Beitrag C5-3, insgesamt 11 S.Kongress: Magdeburger Maschinenbau-Tage 12 (Magdeburg : 2015.09.30-10.01)[Beitrag auf CD-ROM]

Book chapter

An optimization approach within supervisor architecture for boiler control

Ryashentseva, Daria; Lüder, Arndt; Rosendahl, Ronald; Finaev, Valerij

In: 20th IEEE Conference on Emerging Technologies and Factory Automation (ETFA): September 8 - 11, 2015, Luxembourg - Piscataway, NJ: IEEE, insges. 4 S.

Book chapter

Data exchange toward PLC programming and virtual commissioning

Lüder, Arndt; Schmidt, Nicole; Rosendahl, Ronald

In: Proceedings of the 2015 IEEE International Conference on Industrial Informatics (INDIN) - Piscataway, NJ: IEEE, 2015, Art. CD-005134, S. 492-498[Beitrag auf USB-Stick]

Book chapter

Characterizing integration approaches - identifying integration approach candidates for use in industrie 4.0

Schmidt, Nicole; Lüder, Arndt; Rosendahl, Ronald; Ryashentseva, Daria; Foehr, Matthias; Vollmar, Jan

In: Proceedings of the 2015 IEEE International Conference on Industrial Informatics (INDIN) - Piscataway, NJ: IEEE, 2015, Art. CD-005126, S. 527-532[Beitrag auf USB-Stick]

Book chapter

Surveying integration approaches for relevance in cyber physical production systems

Schmidt, Nicole; Lüder, Arndt; Rosendahl, Ronald; Ryashentseva, Daria; Foehr, Matthias; Vollmar, Jan

In: 20th IEEE Conference on Emerging Technologies and Factory Automation (ETFA): September 8 - 11, 2015, Luxembourg - Piscataway, NJ: IEEE, insges. 8 S.

Book chapter

Online Evaluation of Manipulation Tasks für Mobile Robots in Industry 4.0 Scenarios

Zug, Sebastian; Wilske, Stefan; Steup, Christoph; Lüder, Arndt

In: 20th IEEE Conference on Emerging Technologies and Factory Automation (ETFA): September 8 - 11, 2015, Luxembourg - Piscataway, NJ: IEEE, 2015, Art. ETFA2015 181, insgesamt 7 S.

Book chapter

Industry 4.0 value networks in legacy systems

Rosendahl, Ronald; Schmidt, Nicole; Lüder, Arndt; Ryashentseva, Daria

In: 20th IEEE Conference on Emerging Technologies and Factory Automation (ETFA): September 8 - 11, 2015, Luxembourg - Piscataway, NJ: IEEE, insges. 4 S.

Book chapter

Operating articulated objects with force sensitive mobile manipulators

Hanses, Magnus; Walter, Christoph; Lüder, Arndt

In: 20th IEEE Conference on Emerging Technologies and Factory Automation (ETFA): September 8 - 11, 2015, Luxembourg - Piscataway, NJ: IEEE, insges. 4 S.

Peer-reviewed journal article

Requirements and concept for Plug-and-Work - Adaptivity in the context of Industry 4.0

Schleipen, Miriam; Lüder, Arndt; Sauer, Olaf; Flatt, Holger; Jasperneite, Jürgen

In: Automatisierungstechnik - Berlin : De Gruyter, Bd. 63 (2015), Heft 10, S. 801-820

Scientific monograph

AutomationML in a nutshell - the glue for seamless automation engineering

Schmidt, Nicole; Lüder, Arndt

In: Magdeburg: AutomationML consortium, 2015, State: November 2015, 41 S., graph. Darst.

2014

Abstract

Regionalization of engineering

Schäffler, Thomas; Foehr, Matthias; Kodes, Rudolf; Müller-Martin, Andreas; Lüder, Arndt

In: 20th ICE Conference - IEEE TMC Europe, 2014 . - 2014Kongress: ICE Conference 20 (Bergamo, Italy : 2014.06.23-25)

Book chapter

Integration des Menschen in Szenarien der Industrie 4.0

Lüder, Arndt

In: Industrie 4.0 in Produktion, Automatisierung und Logistik - Wiesbaden : Springer Vieweg ; Bauernhansl, Thomas *1969-* . - 2014, S. 493-507

Book chapter

AutomationML for user requirements fulfilment related to engineering process efficiency

Schmidt, Nicole; Lüder, Arndt; Steininger, Heinrich; Biffl, Stefan

In: IECON 2014: 40th annual conference of the IEEE Industrial Electronics Societ ; Dallas, October 29 - November 1, 2014 ; proceedings/ IEEE Industrial Electronics Society - Piscataway, NJ: IEEE, 2014 . - 2014, S. 4902-4908Kongress: IECON 40 (Dallas : 2014.10.29-11.01)[Beitrag auf USB-Stick]

Book chapter

A readiness check for regionalization of engineering

Schäffler, Thomas; Kodes, Rudolf; Foehr, Matthias; Lüder, Arndt; Goetz, Johannes; Franke, Jörg

In: IECON 2014: 40th annual conference of the IEEE Industrial Electronics Societ ; Dallas, October 29 - November 1, 2014 ; proceedings/ IEEE Industrial Electronics Society - Piscataway, NJ: IEEE, 2014 . - 2014, S. 4882-4888Kongress: IECON 40 (Dallas : 2014.10.29-11.01)[Beitrag auf USB-Stick]

Book chapter

Elektronische Datenverarbeitung - Agentenbasiertes Steuern

Lüder, Arndt; Vogel-Heuser, Birgit; Göhner, Peter

In: Dubbel - Taschenbuch für den Maschinenbau: Taschenbuch für den Maschinenbau - Berlin [u.a.]: Springer Vieweg, 2014 . - 2014, S. 1924-1928, 24., aktualisierte Aufl.

Book chapter

Robust localisation for mobile robots in indoor environments

Hanses, Magnus; Lüder, Arndt

In: 19th IEEE Conference on Emerging Technologies and Factory Automation (ETFA 2014): September 16 - 19, 2014, Barcelonia, Spain - Piscataway, NJ: IEEE, 2014 . - 2014, insges. 8 S.Kongress: ETFA 19 (Barcelona, Spain : 2014.09.16-19)[Beitrag auf USB-Stick]

Book chapter

Analyzing requirements on software tools according to the functional engineering phase in the technical systems engineering process

Schmidt, Nicole; Lüder, Arndt; Steininger, Heinrich; Biffl, Stefan

In: 19th IEEE Conference on Emerging Technologies and Factory Automation (ETFA 2014): September 16 - 19, 2014, Barcelonia, Spain - Piscataway, NJ: IEEE, 2014 . - 2014, insges. 8 S.Kongress: ETFA 19 (Barcelona, Spain : 2014.09.16-19)[Beitrag auf USB-Stick]

Book chapter

Integrating different information types within AutomationML

Lüder, Arndt; Schmidt, Nicole; Rosendahl, Ronald; John, Michael

In: 19th IEEE Conference on Emerging Technologies and Factory Automation (ETFA 2014): September 16 - 19, 2014, Barcelonia, Spain - Piscataway, NJ: IEEE, 2014 . - 2014, insges. 5 S.Kongress: ETFA 19 (Barcelona, Spain : 2014.09.16-19)[Beitrag auf USB-Stick]

Book chapter

Semantic mapping support in AutomationML

Biffl, Stefan; Kovalenko, Olga; Lüder, Arndt; Schmidt, Nicole; Rosendahl, Ronald

In: 19th IEEE Conference on Emerging Technologies and Factory Automation (ETFA 2014): September 16 - 19, 2014, Barcelonia, Spain - Piscataway, NJ: IEEE, 2014 . - 2014, insges. 4 S.Kongress: ETFA 19 (Barcelona, Spain : 2014.09.16-19)[Beitrag auf USB-Stick]

Book chapter

Analyse von Anforderungen an Software-Systeme zum Steuerungsentwurf

Lüder, Arndt; Schmidt, Nicole; Steiniger, Heinrich

In: Entwurf komplexer Automatisierungssysteme: EKA 2014 ; Beschreibungsmittel, Methoden, Werkzeuge und Anwendungen ; 13. Fachtagung mit Tutorium ; 14. bis 15. Mai 2014 in Magdeburg, Denkfabrik im Wissenschaftshafen - Magdeburg: Inst. für Automation und Kommunikation e.V., 2014 . - 2014, insges. 14 S.[Beitrag auf USB-Stick]

Book chapter

Semantikdefinition durch Integration von Klassifikationssystemen in Entwurfsdaten zum verlustfreien Datenaustausch in Werkzeugketten

Lüder, Arndt; Schmidt, Nicole; Graeser, Olaf; Thron, Mario; John, Michael

In: Automation 2014: 15. Branchentreff der Mess- und Automatisierungstechnik, 01. und 02. Juli 2014, Baden-Baden - Düsseldorf: VDI-Verl., 2014 . - 2014, insges. 12 S.Kongress: Kongress "Automation 2014" 15 (Baden-Baden : 2014.07.01-02)[Beitrag auf CD-ROM]

Book chapter

Regionalization of engineering - scenarios and requirements

Schäffler, Thomas; Kodes, Rudolf; Hoßbach, Nadja; Cato, Patrick; Lüder, Arndt

In: ICBTT 2014: proceedings of the 7th International Conference on Business and Technology Transfer ; December 4-6, 2014, Magdeburg, Germany - JSME, 2014 . - 2014, S. 88-98Kongress: ICBTT2014 7 (Magdeburg : 2014.12.04-06)

Book chapter

Early and efficient quality assurance of risky technical perameters in a mechatronic design process

Biffl, Stefan; Lüder, Arndt; Schmidt, Nicole; Winkler, Dietmar

In: IECON 2014: 40th annual conference of the IEEE Industrial Electronics Societ ; Dallas, October 29 - November 1, 2014 ; proceedings/ IEEE Industrial Electronics Society - Piscataway, NJ: IEEE, 2014 . - 2014, S. 2544-2550Kongress: IECON 40 (Dallas : 2014.10.29-11.01)[Beitrag auf USB-Stick]

Peer-reviewed journal article

Kommunikation mit AutomationML beschrieben

Riedl, Matthias; Lüder, Arndt; Heines, Benno; Drath, Rainer

In: Atp-Edition: automatisierungstechnische Praxis ; Organ der GMA (VDI-VDE-Gesellschaft Meß- und Automatisierungstechnik) und der NAMUR (Interessengemeinschaft Automatisierungstechnik der Prozessindustrie) - Essen: DIV Deutscher Industrieverlag GmbH, 2009, Bd. 56.2014, 11, S. 44-51

Dissertation

Advanced production systems - developing context-oriented method and adaptation capabilities for enhanced supply network

Muhammed, Idris Zehrudin; Kühnle, Hermann; Lüder, Arndt

In: Magdeburg, Univ., Fak. für Maschinenbau, Diss., 2014, X, 139 S., graph. Darst., 30 cm

Article in conference proceedings

An minimal tool interface machinery and equipment engineering

Lüder, Arndt; Schmidt, Nicole

In: AutomationML als Integrationsformat: Vernetzung von Organisation, Werkzeugen, Ingenieursdisziplinen, ... ; 3. AutomationML Anwenderkonferenz, 07. bis 08. Oktober 2014, Blomberg - AutomationML e. V., 2014 . - 2014, insges. 9 S.Kongress: AutomationML Anwenderkonferenz 3 (Blomberg : 2014.10.07-08)[Beitrag auf USB-Stick]

Article in conference proceedings

Implementation of an AutomationML-Interface in the digital factory simulation

Yemenicioğlu, Ender; Lüder, Arndt

In: AutomationML als Integrationsformat: Vernetzung von Organisation, Werkzeugen, Ingenieursdisziplinen, ... ; 3. AutomationML Anwenderkonferenz, 07. bis 08. Oktober 2014, Blomberg - AutomationML e. V., 2014 . - 2014, insges. 8 S.Kongress: AutomationML Anwenderkonferenz 3 (Blomberg : 2014.10.07-08)[Beitrag auf USB-Stick]

Article in conference proceedings

The best practices of engineering regionalization

Schaeffler, Thomas; Foehr, Matthias; Jaeger, Tobias; Kodes, Rudolf; Müller-Martin, Andreas; Lüder, Arndt

In: IEEE International Conference on Industrial Technology (ICIT), 2014 - Piscataway, NJ : IEEE, S. 913-918

Article in conference proceedings

AutomationMl als Datendrehscheibe für die digitale Fabrik

Lüder, Arndt

In: Fachkongress Digitale Fabrik, Produktion: November 04. und 05. 2014 Braunschweig - [Landsberg]: Süddeutscher Verl. Veranstaltungen, 2014 . - 2014, insges. 22 S.Kongress: Fachkongress Digitale Fabrik, Produktion 10 (Fulda : 2014.11.04-05)

Due to technical reasons only 200 publications can be displayed.

View more in the research portal.

Last Modification: 23.05.2022 - Contact Person: Arndt Lüder